期刊文献+

再生混凝土弹性模量的分析和计算 被引量:4

Study on Elastic Modulus of Recycled Aggregate Concrete
下载PDF
导出
摘要 在分析传统混凝土两相复合材料弹性模量计算模型的基础上,考虑再生骨料中老旧砂浆含量的影响,分析水泥砂浆的体积与新天然骨料体积分数、再生骨料体积分数和再生骨料替代率之间的关系,建立预测再生混凝土弹性模量的三相复合材料模型。开展了不同龄期下不同骨料替代率再生混凝土弹性模量测试的试验研究,并采用所建立的各个复合材料模型与试验结果进行对比分析,建议了最适合再生混凝土弹性模量计算的复合材料模型,给出了随龄期变化时再生混凝土弹性模量的变化规律。 Based on the existing traditional two-phase model of elastic modulus for two-phase composites, and considering the influence of the residual mortar (RM) in recycled aggregate, the relationships between total mortar volume, the volume fraction of natural aggregate and recycled aggregate and the aggregate replacement ratio were analyzed. A three-phase model for predicting the elastic modulus of RAC was established. Experimental work for the elastic modulus of recycled aggregate concrete at different ages was carried out. The suggested composite models have been applied to predict the elastic modulus of RAC .The models likely to yield the lowest number of errors were sought and some suggestions were made accordingly.
作者 王怀亮
出处 《大连大学学报》 2013年第3期45-49,71,共6页 Journal of Dalian University
基金 国家自然科学基金资助项目(50908026) 武汉大学水资源与水电工程科学国家重点实验室开放基金(2012B102)
关键词 再生混凝土 复合材料模型 龄期 弹性模量 recycled aggregate concrete (RAC) composite material models age elastic modulus
  • 相关文献

参考文献5

  • 1Oikonomou N.Recycled concrete aggregates[J].Cement andConcrete Composites,2005,27(2):315-318.
  • 2Tam V W Y,Tam C M.Parameters for assessing recycledaggregate and their correlation[J].Waste Management andResearch,2009,27(1):52-58.
  • 3Casuccio M,Torrijos M C,Giaccio G,et al.Failuremechanism of recycled aggregate concrete[J].Constructionand Building Materials,2008,22(7):1500-1506.
  • 4Poon C S,Shui Z H,Lam L.Effect of microstructure of ITZon compressive strength of concrete prepared with recycledaggregates[J].Construction and Building Materials,2004,18(6):461-468.
  • 5杜修力,金浏.含孔隙混凝土复合材料有效力学性能研究[J].工程力学,2012,29(6):70-77. 被引量:25

二级参考文献21

  • 1郑建军,周欣竹,姜璐.混凝土杨氏模量预测的三相复合球模型[J].复合材料学报,2005,22(1):102-107. 被引量:17
  • 2卢子兴,黄筑平,王仁.基于三相球模型确定泡沫塑料有效模量[J].固体力学学报,1996,17(2):95-102. 被引量:16
  • 3卢子兴,高镇同.应用微分方法确定复合泡沫塑料的杨氏模量[J].北京航空航天大学学报,1996,22(6):692-695. 被引量:11
  • 4Huang J S, Gibson L J. Elastic moduli of a composite of hollow spheres in a matrix[J]. Journal of the Mechanics and Physics of Solids, 1993, 41(1): 55-75.
  • 5Christensen R M, Lo K H. Solutions for effective shear properties in three phase sphere and cylinder models[J]. Journal of the Mechanics and Physics of Solids, 1979, 27(4): 315-330.
  • 6Machenzie J K. The elastic constants of a solid containing spherical holes[J]. Proceedings of Physical Society, 1950, B63: 808-813.
  • 7Kachanov M, Tsukrov I, Shafiro B. Effective moduli of solids with cavities of various shapes[J]. Applied Mechanics Reviews, 1994, 47(2): 151-174.
  • 8Palumbo M, Tempest E. The effect of particle-matrix interfacial conditions on the compressive elasticity of epoxy resins filled with untreated hollow glass microspheres[J]. Polymers & Polymer Composites, 1997, 5(3): 217-221.
  • 9Vardar O, Finnie I, Biswas D R. Effect of spherical pores on the strength of a polycrystalline ceramic [J]. International Journal of Fracture, 1977, 13 (2): 215-- 223.
  • 10Popovics S. New formulas for the prediction of the effects of porosity on concrete strength[J]. ACI Materials Journal, 1981, 78(2): 127-129.

共引文献24

同被引文献50

引证文献4

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部