期刊文献+

路面灌缝胶低温拉伸力学行为研究 被引量:2

Research on Low Temperature Tensile Properties of Crack Sealants
下载PDF
导出
摘要 裂缝是沥青路面最严重的病害形式之一,不仅会成为路表雨水进入基层的通道,使基层直接受到冲刷、浸泡,影响路基的强度与稳定性,还会对行车舒适度及安全性造成危害。路面灌缝胶作为修补裂缝的主要材料,已被各地道路养护部门大量使用;但由于中国路面灌缝胶的标准规范较少,现有的标准规范不能准确评价灌缝胶的路用性能,造成市场上的灌缝胶路用性能参差不齐。冬季,在路面车辆荷载作用下,很多灌缝胶与裂缝壁界面处开裂,失去防水的效果。低温拉伸试验的结果是对灌缝胶材料分类的依据,是灌缝胶材料性能最重要的指标。因此展开灌缝胶材料的低温拉伸性能研究,
作者 汪德才 孟旭
出处 《筑路机械与施工机械化》 2013年第7期38-42,共5页 Road Machinery & Construction Mechanization
  • 相关文献

参考文献3

  • 1Haithem Soliman, Ahmed Shalaby,Leonnie Kavanagh. Performance Valuation of Joint and Crack Sealants in Cold Clhtes Using DSR and BBR Tests[J]. Journal of Matemls in Civil Eneeting,2(')8, 20('7): 470-477.
  • 2Imad L. A1-Qadi, Sarner Dessouky,Shih-Hsien Yang. Linear Viscoelastic Modeling for Hot- Poured Crack SeaLmts at Low Temperature[J]. Journal of Materials in Civil Engineering, 2010,22(10):996-1004.
  • 3李峰,黄颂昌,徐剑,秦永春.沥青路面灌缝胶性能评价及技术要求[J].交通运输工程学报,2009,9(2):7-11. 被引量:32

二级参考文献7

  • 1ASTM D5329-04, standard test methods for sealants and fillers, hot-applied, for joints and cracks in asphaltic and Portland cement concrete pavements[S].
  • 2ASTM D5078-95, standard specification for crack filler, hot-applied, for asphalt concrete and Portland cement concrete pavements[S].
  • 3ASTM D1190-97, standard specification for concrete joint sealer, hot-applied elastic type[S].
  • 4ASTM D3405-97, standard specification for joint sealants, hot-applied, for concrete and asphalt pavements[S].
  • 5ASTMD6690-06a, standard specification for joint and crack sealants, hot applied, for concrete and asphalt pave ments[S].
  • 6ASTM D1985-91, standard practice for preparing concrete blocks for testing sealants, for joints and cracks[S].
  • 7ASTM D217-02, standard test methods for cone penetration of lubricating grease[S].

共引文献31

同被引文献5

引证文献2

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部