基于ANSYS的汽车传动轴的有限元分析

Based on ANSYS to the finite element analysis of automobile transmission shaft

利用ANSYS进行传动轴的强度及刚度校核,给出相应的扭转应力、单位扭转角等数据有限元分析结果,在进行强度及刚度校核时,还将利用ANSYS进行验证。在相同的受力条件下,分别对实心轴和空心轴进行应力分析,分析出传动轴中空心轴和实心轴的性能优劣,为传动轴设计提供理论依据。对实际工程中选用有着重要参考意义。

This article uses the ANSYS to check the strength and rigidity of drive shaft, give the corresponding tensional stress, unit torsion angle data, use finite element analysis results, also check of the strength and stiffness will use ANSYS to verify, stress analysis of Solid shaft and hollow shaft under the same loading conditions to analyze the performance of the pros and cons of the drive shaft in the hollow shaft and solid shaft, providing a theoretical basis in designing of shaft designed. And it＇s very important reference significance for practical use.