期刊文献+

重熔温度对半固态AlSi7Mg合金变形性的影响 被引量:1

The Effect of Remelitng Temperature on The Deformation Behavior of the Semi-Solid AlSi7Mg Alloys
下载PDF
导出
摘要 采用 Gleeble1 50 0热模拟机对半固态 Al Si7Mg合金触变压缩过程中不同加热温度时的变形性进行研究。结果表明 ,保温时间为 1 0~ 30 s,变形温度为 569~ 583℃时 ,合金具有良好的可触变压缩性。在形变速率相同的条件下 ,随变形温度的升高 ,试样内部最大形变抗力及最大应力呈下降趋势。 The deformation behavior of the semi solid AlSi7Mg alloys was studied using the gleeble 1500 thermal stress strain simulator.It is shown that the alloy possesses thixotropic behavior when the reheating time is between 10 to 30s,the deformation temperature between 569 to 583℃.The inner maximum resistance force and the maximum stress of the specimen decreases as the deformation temperature increasing.
出处 《热加工工艺》 CSCD 北大核心 2000年第5期15-16,42,共3页 Hot Working Technology
关键词 半固态铝合金 变形性 变形温度 重熔温度 semi solid aluminum alloy deformation behavior deformation velocity deformation temperarture
  • 相关文献

参考文献2

二级参考文献3

共引文献28

同被引文献7

  • 1Kirkwood D H.Semisolid Metal processing. International Management . 1994
  • 2McLelland A R A,Henderson N G,Atkinson H V,et al.Anomalous rheological behavior of semi-solid alloy slurries at low shear rates. Materials Science and Engineering . 1997
  • 3Garat M,Henderson N G,Atkinson H V,et al.Aluminum semi-solid processing: from the billet to the finished part. Proceedings of the 5th International Conference on Semi-Solid Processing of Alloys and Composites . 1998
  • 4Kapranos P,Kirkwood D H,Barkhudarov M R,et al.Modelling of structural breakdown during compression of semi-solid alloy slugs. Proceedings of the 5th International Conference on Semi-Solid Processing of Alloys and Composites [ C ] . 1998
  • 5Chiarmetta G.Thixoforming of automobile components. Proceedings of the 4th International Conference on Semi-Solid Processing of Alloys and Composites [ C] . 1996
  • 6Chen C P and Tsao C-Y.Semi-solid deformation of A356Al alloys. Proceedings of the 4th International Conference on Semi-Solid Processing of Alloys and Composites . 1996
  • 7张大辉,李延军,钟雪友.半固态铸造充型过程数值模拟研究新进展[J].热加工工艺,2000,29(4):43-45. 被引量:9

引证文献1

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部