摘要
为了实现高温环境下材料高应变率动态拉伸实验技术,将分离式Hopkinson杆直接拉伸装置中试样与拉杆的螺纹连接形式变成楔形连接形式,并加装了气动同步装置系统。这样,在对试样加高温时,能使靠近试样的入射和透射杆端处于较低温度。当撞击管向传递法兰运动时,气动同步装置瞬间拖动透射杆和试样,使两者之间的间隙为零,此时沿入射杆传递的入射波同时对试样拉伸加载。经实验验证,此方法可以有效实现材料高温高应变率拉伸加载。
In order to realize the dynamic tensile rate, some modifications are required for the connection way between the specimen rod and test of materials at high temperature and high strain traditional split Hopkinson tensile bar. changing the bar from threaded connection to wedge groove connection form and installing a pneumatic synchronization device system. These modifications enable the end between incident bar and transmission bar, which is closed to the specimen, is at a low temperature, while the specimen is at the desired high temperature. When the impact tube is moving towards the transfer flange, the pneumatic synchronization device system will drag the transmission bar and the specimen instantly to make the gap between the transmission bar and specimen close. Just at this time, the incident tensile pulse reaching the interface between the incident bar and the specimen begins to load. Experimental results show that these modifications are valid by dynamic tensile test of materials at high temperature and high strain rate.
出处
《实验力学》
CSCD
北大核心
2013年第3期299-306,共8页
Journal of Experimental Mechanics
关键词
HOPKINSON杆
楔形连接
高温
高应变率
同步加载
Hopkinson bar
wedge groove connection
high temperature
high strain rate
synchronousloading