摘要
为分析变压器直流注入方式对交流励磁的影响,利用三维有限元方法计算单相变压器的直流偏磁问题。以实际电力变压器为例搭建仿真平台,根据其具体参数建立模型,对比分析在原边和副边分别注入直流时变压器的直流偏磁情况。仿真实验结果表明,两种注入方式下交流电流的波形基本相同。
In order to analyze the influence of transformer dc injection mode on AC excitation, this paper calculates the DC bias inf single - phase transformer by three - dimensional finite element. Taking the practical electric power transformer as an example, the simulation platform is established. According to the specific parameters, the model is established to analyze and compare the DC bias in transformer when the dc is injected at the primary side and at the secondary side. The simulation shows that the AC waveforms are almost the same by the two injection modes.
出处
《黑龙江电力》
CAS
2013年第1期13-15,共3页
Heilongjiang Electric Power
基金
广东省教育厅专项重点实验室资助项目(IDSYS200701)
关键词
变压器直流偏磁
注入方式
三维有限元
transformer dc bias
injection mode
three -dimensional finite element