4TETSUYA T, ISHIAKU U S, MIZOGUCHI M, et al. The effect of heat sealing temperature on the properties of OPP or CPP heat seal: Ⅰ Mechanical properties[J]. Journal of Applied Polymer Science, 2005, 97(3): 753-760.
5MEKA P, StEHLING F. Heat sealing of semi crystalline polymer films: Ⅰ. Calculation and measurements interfacial tempera tures: Effect of process variables on seal properties[J]. Appl Polym Sci, 1994, 51: 89-103.
6MUELLER C, CAPACCIO G, HILTNER A, et al. Heat sealing of LLDPE: Relationships to melting and interdiffusion [J]. Journal of Applied Polymer Science, 1998, 70: 2021-2030.
7HASHIMOTO Y, ISHIAKU U S, LEONG Y W, et al. Effect of heatsealing temperature on the failure criteria of oriented polypropylene cast polypropylene heat seal[J]. Polymer Engineering and Science, 2006, 46(2): 205-214.
8DINESH A, HUGH L, RAFAEL A, et al. Heat sealing measurement by an innovative technique[J]. Packag Technol Sci, 2006, 19: 245-257.
3HASHIMOTO Y, TETUYA T, ISHIAKU U S, et al. The Effect of the Heat Sealing Temperature on the Properties of OPP or CPP Heat Seal. I. Mechanical Properties[J]. Polymer Engi- neering and Science, 2006,46 (2) : 205-214.
4TETUYA T, ISHIAKU U S, MACHIKO M, et al. Effect of the Heat Sealing Temperature on the Properties of OPP or CPP Heat Seals Part II : Crystallinity and Thermo Mechanical Properties[J]. Journal of Applied Polymer Science, 2006, 99 : 513-519.
5MUHLFELD L, LANGGUTH P, HUSLER H, et al. Influences of Heat Seal Lacquer Thickness on the Quality of Blister Packages[J]. European Journal of Pharmaceutical Sciences, 2012,45(1/2) : 150-157.
6MIHINDUKULASURIVA S, LIM L T. Effects of Liquid Con- taminants on Heat Seal Strength of Low-density Polyethylene Film[J]. Packaging Technology and Science, 2012, 25 (5) : 271-284.
7MICHAEL B, MIKE D, TOM D, et al. Polarized Light Stress Analysis and Laser Scatter Imaging for Non-contact Inspection of Heat Seals in Food Trays[J]. Journal of Food Engineering, 2012, 112(3) : 183-190.
8AITHANI D, LOCKHART H, AURAS R, et al. Heat Sealing Measurement by an Innovative Technique[J]. Pack Technol Sci, 2006, 19(5) : 245-257.
