期刊文献+

含锌高炉粉尘脱除燃煤烟道气中的SO_2 被引量:2

Removal of SO_2 from Flue Gas by Using Zinc-bearing Metallurgical Dusts from Ironmaking Blast Furnaces
下载PDF
导出
摘要 研究了含锌高炉粉尘对燃煤产生的烟道气的脱硫行为. 实验结果表明, 在523(823 K温度范围内, 利用含锌高炉粉尘可以脱除烟道气中87%(93%的SO2, 脱硫率随烟道气温度的升高而增加,其脱硫的表观活化能为4.93 kJ/mol. 实验还发现,在1123(1273 K的温度范围内提高燃煤温度,含锌高炉粉尘对烟道气脱硫率无明显影响. The desulfurization using zinc-bearing metallurgical dusts from blast furnaces has been evaluated through measuring the change of SO2 content in flue gas generated from combusting coal powders. The test results show that 87%(93% SO2 contained in the flue gas can be removed by zinc-bearing metallurgical dusts in the temperature range of 523(823 K, the desufurization fraction of flue gas increases with flue gas temperature, and the apparent desufurization activation energy is about 4.39 kJ/mol. The test results also indicate that increasing coal combustion temperature from 1123 K to 1273 K (for producing flue gas) has on obvious effect on the desufurization fraction by zinc-bearing metallurgical dusts.
出处 《化工冶金》 EI CSCD 北大核心 2000年第4期438-442,共5页
关键词 含锌高炉粉尘 烟道气 碚硫 动力学 zinc-bearing metallurgical dusts flue gas desufurization kinetics
  • 相关文献

参考文献2

二级参考文献3

共引文献2

同被引文献28

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部