摘要
采用规则井网对平面各向异性油藏布井时,易造成注入水沿高渗透率条带突进,使生产井过早见水,难以实现面积井网均匀驱替效果。为解决该问题,利用流管法构建平面各向同性油藏五点井网产能公式,通过物质平衡方程展开得到井网的见水时间,在满足均匀驱替的基础上,得到无量纲注采井距与各向异性系数的关系,为平面各向异性条件下合理构建五点井网形状提供了理论依据。
When regular well pattern is arranged for planar anisotropic reservoirs,it is likely that injected water advances along high permeability path,resulting in early water breakthrough and hard to achieve uniform oil displacement with areal pattern.Therefore,this research developed a productivity formula of five-spot pattern for planar isotropic reservoir by using stream tube method;the material balance equation is expanded to obtain water breakthrough time of five-spot pattern,and the relationship between dimensionless well spacing and anisotropy coefficient is derived on the basis of uniform displacement.The result of this research offers theoretical basis for reasonably arranging five-spot pattern under planar anisotropic condition.
出处
《特种油气藏》
CAS
CSCD
北大核心
2013年第3期111-113,126,共4页
Special Oil & Gas Reservoirs
基金
国家科技重大专项"复杂油气田地质与提高采收率技术"(2009ZX05009-004-03)
中央高校基本基金"低渗透储层压裂开采井网流管模拟器开发"(2010ZY10)
关键词
平面各向异性油藏
五点井网
平面各向异性系数
无量纲井距
见水时间
planar anisotropic reservoir
five-spot pattern
planar anisotropy coefficient
dimensionless well spacing
breakthrough time