摘要
自动喷水灭火系统设计时为满足规范的要求,往往存在设计压力、流量过剩的情况,造成了能量的极大浪费。对此,本文通过自动喷水灭火系统设计中最不利点处作用面积不同形状与管道布置方式对自动喷水灭火系统流量和压力的影响进行计算,可以从中得出最为节能的最不利点处作用面积形状与管道布置方式,这样可降低系统的设计压力、流量,达到降低喷淋系统能耗的目的,也验证了"喷规"第9.1.2条的合理性。
Abstract：It was quite often a situation that pressure flow surplus in automatic sprinkler system design to meet the standard requirement, which caused a tremendous waste of energy. Therefore, we calculated the flow and pressure of the different shape and pipeline arrangement in the most unfavorable point of function area about the influence of the computation in the automatic sprinkler system, which can drew the most energy- saved way of the most unfavorable point function area shape and piping arrangement, it also proved the rationality of the article 9.1.2 of 《Automatic Sprinkler System Design Standard》.
出处
《节能技术》
CAS
2013年第4期371-374,共4页
Energy Conservation Technology
关键词
自喷系统
作用面积
布管方式
流量
压力
spray system
function area
pipe arrangement
flow
pressure
