期刊文献+

高效液相色谱法测定化妆品中二乙醇胺的量 被引量:6

Determination of diethanol amine content in cosmetics by HPLC
下载PDF
导出
摘要 建立了一种高效液相色谱法测定化妆品中二乙醇胺含量的方法。采用丹磺酰氯为衍生试剂,样品在pH=9的缓冲溶液与乙腈的混合溶液中55℃避光衍生30 min之后,经高效液相色谱法测定二乙醇胺含量。结果表明,二乙醇胺在10~200 mg·L-1范围内质量浓度与峰面积呈良好的线性关系,平均回收率为98.7%~103.4%,相对标准偏差RSD为3.6%~5.1%。 A new method for determination of diethanol amine content in cosmetics by HPLC was established. The derivation reaction was conducted in darkness at 55 ℃ for 30 min in mixed solution of aqueous buffer ( pH = 9) and acetonitrile, and with dansyl chloride usedas derivation reagent. The results showed that a good linear relationship exists between the peak area and the mass concentration in the range of 10 -200 mg . L-I for diethanol amine. The average recovery is in the range of 98.7% - 103.4%. The relative standard deviation is 3.6% -5.1%.
作者 吴颖 季红斌
出处 《日用化学工业》 CAS CSCD 北大核心 2013年第4期317-320,共4页 China Surfactant Detergent & Cosmetics
基金 上海市研究生教育创新计划资助项目(CX2012003) 上海应用技术学院引进人才科研启动资助项目(YJ2011-28)
关键词 化妆品 二乙醇胺 高效液相色谱法 衍生化 cosmetics diethanol amine HPLC derivatization
  • 相关文献

参考文献9

二级参考文献19

  • 1黄尚顺,王俊,陈远霞,谭波,韦志明,马就庆.单、二、三乙醇胺混合液的气相色谱分析[J].现代化工,2009,29(S1):358-359. 被引量:7
  • 2杨洗,单自兴,赵德杰.硼酸烷基醇酰胺酯的合成与性质[J].精细化工,1996,13(3):1-2. 被引量:15
  • 3.HG/T 2916-1997.中华人民共和国化工行业标准工业用二乙醇胺[S].,..
  • 4HG/T 2916—1997.中华人民共和国化工行业标准工业用二乙醇胺[S].[S].,..
  • 5DONOUE K. Pigment [P]. JP: 62197463, 1987-09-01.
  • 6KUDO N, IBE H. Process for inhibiting corrosion of iron or steel placed in cement products [P]. US: 3976494, 1976- 08- 24.
  • 7HAMANAKA H, KAKIZAKI TETSUJI MITSUBISHI P. Permannent antistatic resin composition [P]. EP: 0337664, 1989- 10- 18.
  • 8HORACEK HEINRICH D. Spiro: cyclic boric acid ester (s) - used as flame retardants for plastics [P]. DE: 4015490, 1991 - 11 -21.
  • 9ROSEN M. Surfactants and interfacial phenomena [ M ]. New York:John - Wiley & Sons, 1989. 393 - 396.
  • 10赵国玺.离子型碳氟与碳氢表面活性剂在胶团及吸附层中的分子之间相互作用[J].物理化学学报,1985,1(2):111-113.

共引文献52

同被引文献36

引证文献6

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部