期刊文献+

钢箱梁桥用环氧沥青材料的制备 被引量:2

Preparation of epoxy asphalt materials for steel bridge
原文传递
导出
摘要 采用重交70#沥青、聚丙二醇、脂肪族缩水甘油醚环氧树脂、芳香族酸酐和二聚脂肪酸酐(5个因素)及E-51环氧树脂制得环氧沥青材料。设计了五因素四水平正交实验,以拉伸强度和断裂伸长率为主要考核指标,研究了沥青、活性增容剂、固化剂等主要因素对环氧沥青材料力学性能的影响,并优化出最佳配方:10.0 gE-51双酚A环氧树脂,52.0 g重交70#沥青,1.5 g芳香族酸酐,8.0 g二聚脂肪酸酐,2.0 g脂肪族缩水甘油醚环氧树脂及0.5 g聚丙二醇,材料断裂伸长率可达231.65%,拉伸强度2.14 MPa。 The epoxy asphalt materials were prepared of heavy traffic 70# asphalt, polypropylene glycol, aliphatic glycidyl ether epoxy resin, aromatic anhydride and dimerized fatty acid anhydride (5 factors) and E -51 epoxy res- in. The five -factors and four -level orthogonal experiment was designed using tensile strength and elongation at break as the major assessment indicators. The major factors such as asphalt, reactive compatibilizer and curing agent on the mechanical properties of epoxy asphalt were investigated and the optimized best recipe was as followed: 10. 0 g E -51 bisphenol A epoxy resin, 52. 0 g heavy traffic 70# asphalt, 1.5 g aromatic acid anhydride, 8.0 g dimerized fatty acid anhydride, 2. 0 g of aliphatic glycidyl ether epoxy resin and 0. 5 g polyethylene glycol. The e- longation at break of the material was up to 231.65% and tensile strength was 2. 14 MPa.
出处 《热固性树脂》 CAS CSCD 北大核心 2013年第4期25-28,共4页 Thermosetting Resin
基金 北京市自然科学基金项目(2132027)资助
关键词 环氧树脂 沥青 聚丙二醇 脂肪族缩水甘油醚环氧树脂 芳香族酸酐 二聚脂肪酸酐 拉伸强度 断裂伸长率 epoxy resin asphalt polypropylene glycol aliphatic glycidyl ether epoxy resin aromatic acid an-hydrides dimerized fatty acid anhydride tensile strength elongation at break
  • 相关文献

参考文献11

二级参考文献13

  • 1亢阳,陈志明,闵召辉,黄卫,程刚,王晓.顺酐化在环氧沥青中的应用[J].东南大学学报(自然科学版),2006,36(2):308-311. 被引量:27
  • 2陈志明,亢阳,闵召辉,黄卫.Preparation and characterization of epoxy asphalt binder for pavement of steel deck bridge[J].Journal of Southeast University(English Edition),2006,22(4):553-558. 被引量:5
  • 3Kortschot M, Woodhams R T. Torsional braid analysis of bitumen-liquid rubber mixtures [ J ]. Polymer Engineering & Science, 1984,24 (4) : 252 - 258.
  • 4Ouyang Chunfa, Wang Shifeng, Zhang Yong, et al. Low-density polyethylene/silica compound modified asphahs with high-temperature storage stability [ J]. Journal of Applied Polymer Science, 2006,101 ( 1 ) : 472 - 479.
  • 5Chen J S, Huang C C. Fundamental characterization of SBS-modified asphalt mixed with sulfur [J]. Journal of Applied Polymer Science, 2007,103(5 ) : 2817 -2825.
  • 6Gallagher K P, Vermilion D R. Thermosetting asphalt: US, 5576363[P]. 1996-11-19.
  • 7Gallagher K P, Vermilion D R. Thermosetting asphalt having continuous phase polymer: US, 5604274 [ P ]. 1997-02-18.
  • 8Hayashi Isobe M, Yamashita T. Asphalt compositions: US, 4139511 [ P]. 1979-02-13.
  • 9Hijikata G, Sakaguchi G. Epoxy resin-bitumen material composition: US, 4360608[P]. 1982-11-23.
  • 10X. Lu,U. Isacsson,J. Ekblad. Influence of polymer modification on low temperature behaviour of bituminous binders and mixtures[J] 2003,Materials and Structures(10):652~656

共引文献78

同被引文献19

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部