摘要
研制了一种含Fe,Cr,Ni等元素的自保护药芯焊丝,通过自保护堆焊工艺在45号钢基体上制备了铁基堆焊层。对堆焊层的宏观形貌和堆焊工艺条件进行简单评估,并对堆焊层的物相组成和微观组织结构进行了表征,对堆焊层的硬度、耐磨性、耐蚀性、热稳定性、抗裂性、自保护性能等进行了研究。结果表明:堆焊层为含非晶涂层,具有较好的耐磨、抗裂、耐蚀性能,且热稳定性良好,各项焊接工艺性能也较为理想,综合性能优异。
A self-shielded flux with Fe,Cr,Ni and so on was welded onto 45 steel substrate and prepared to iron-based surfacing welding coating.The macro-morphology and welding process conditions were assessed.The phase composition and microstructureof the surfacing coating were characterized.And it＇s hardness,wear resistance,corrosion resistance,thermal stability,crack resistance,self-protective properties,etc were studied.The results show that welding coating contains amorphous,with good wear-resistant,crack resistance,corrosion resistance,and good thermal stability,welding process performance,excellent comprehensive properties.
出处
《表面技术》
EI
CAS
CSCD
北大核心
2013年第4期87-90,共4页
Surface Technology
关键词
自保护药芯焊丝
堆焊层
非晶
高耐磨
高硬度
self-shielded flux
surfacing coating
amorphous
high wear resistance
high hardness
