期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

复合材料管板热交换器制造中的焊接工艺评定 被引量：1

Welding Procedure Qualification in Manufacture of Heat Exchanger with Composite Tube Sheet
下载PDF
导出
摘要 详细介绍了按ASME规范评定耐蚀金属堆焊工艺和热交换器上管-管板接头焊接工艺中需考虑的若干问题。 Introduces some concerns in qualification of corrosion resistant metal overlaying welding and welding of tube-tube sheet joints on heat exchanger in accordance with ASME code.
作者 陈雯晶 李艳 史雪芬 郭晶
机构地区 大连日立机械设备有限公司
出处 《化工装备技术》 CAS 2013年第4期42-50,共9页 Chemical Equipment Technology
关键词 耐蚀金属堆焊 管-管板接头 镍基合金 焊接工艺评定 换热器 焊接 Corrosion resistant metal overlaying welding Tube-tube sheet joint Nickel alloy Welding procedure qualification Heat exchanger Welding
分类号 TG457.2 [金属学及工艺—焊接]
  • 相关文献

参考文献14

  • 1ASME Code, Section Ⅷ , Division 2. Rules for construction of pressure vessels: Ahemative rules [ S] . 2010.Edition with 2011 Addenda. ASME, New York.
  • 2SA-266/SA-200M. Specifications for carbon steel forgings for pressure vessels [S] . In ASME Code, Section Ⅱ, Part A. 2010 Edition with 2011 Addenda. ASME, New York: 417-421.
  • 3ASME Code. Section IX.Qualification standard for welding and brazing procedures, welders, brazers, and welding and brazing operators [S] . 2010 Edition with 2011 Addenda. ASME, New York.
  • 4ASTM E527. Standard practice for numbering metals and alloys [S] . 2003 Edition.
  • 5SFA-5.11/SFA-5.11M. Specification for nickel and nickel-alloy welding electrodes for shielded metal are welding IS] . In ASME Code, Section II, Part C. 2010 Edition with 2011 Addenda. ASME, New York: 279-308.
  • 6SFA-5.14/SFA-5.14M. Specification for nickel and nickel-alloy bare welding electrodes and rods [ S] . In ASME Code, Section Ⅱ, Part C. 2010 Edition with 2011 Addenda. ASME, New York: 341-359.
  • 7SB-423. Specification for nickel-iron-chromium- molybdenum-copper alloy (UNS N08825 and N08221) seamless pipe and tube [S] . In ASME Code, Section Ⅱ, Part B. 2010 Edition with 2011 Addenda. ASME, New York : 589-592.
  • 8SB-424. Specification for Ni-Fe-Cr-Mo-Cu alloy (UNS N08825 and UNS N08221) plate, and strip [ S] . In ASME Code, Section Ⅱ, Part C. 2010 Edition with 2011 Addenda. ASME, New York: 593-603.
  • 9SB-425. Specification for Ni-Fe-Cr-Mo-Cu alloy (UNS N08825 and UNS N09221) rod and bar [S] . In ASME Code, Section Ⅱ, Part C.2010 Edition with 2011 Addenda. ASME, New York: 605-611.
  • 10SB-704. Specification for welded UNS N06625, UNS N06219, and UNS N08825 alloy tubes [S] . In ASME Code, Section Ⅱ, Part C. 2010 Edition with 2011 Addenda. ASME, New York:1003-1004.

共引文献16

同被引文献9

引证文献1

化工装备技术
2013年 第4期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部