期刊文献+

采用表面喷锌及喷硅扁管的微通道换热器长效特性研究 被引量:1

Study on Long-term Performance of Microchannel Heat Exchanger with Zn-coated and Si-coated Extruded Tube
下载PDF
导出
摘要 腐蚀特性是全铝微通道换热器的主要特征之一。对两种不同表面处理方式的挤压扁管:表面喷锌挤压扁管和表面喷硅挤压扁管的长效特性进行了对比研究。对采用这两种不同表面处理方式的挤压扁管的微通道换热器样件,分别进行了7天和14天的盐雾腐蚀实验(SWAAT),对比腐蚀前后两个换热器样品的换热量、空气侧压降和总热阻变化情况。结果表明,采用表面喷硅扁管的微通道换热器的长效特性优于采用表面喷锌扁管。 Corrosion character is one of the main characters of A1 microchannel heat exchanger. In the present study, standard seawater acidified test (7 and 14 days) were carried out on mierochannel heat exchangers with Zn-eoated extruded tube and Si-coated extruded tube, and the performances of the test samples before and after the corrosion were tested in order to compare the change of capacity, air side pressure drop and thermal resistance. The result showed that, the long-term performance of the sample with Si-coated extruded tube was much better than the sample with Zn-eoated extruded tube.
出处 《制冷学报》 CAS CSCD 北大核心 2013年第4期5-9,共5页 Journal of Refrigeration
基金 十二五国家科技支撑项目(SQ2011GX03D03999)资助~~
关键词 腐蚀 微通道换热器 表面喷锌 表面喷硅 长效性 corrosion microchannel heat exchanger Zn-coated Si-coated long-term performance
  • 相关文献

参考文献8

  • 1Jingwei Wu, Jianguo Yang, Hongyuan Fang, et al. The bond strength of A1 - Si coating on mild steel by kinetic spraying deposition [ J ]. Applied Surface Science, 2006, 252(22) : 7809-7814.
  • 2Sanghoon Yoon, Hyung Jun Kim, Changhee Lee. Deposi- tion behavior of bulk amorphous NiTiZrSiSn according to the kinetic and thermal energy levels in the kinetic sprayingprocess [ J ]. Surface and Coatings Technology, 2006, 200 (20/21) :6022-6029.
  • 3D R Holmes. New corrosion-resistant high temperature heat exchanger materials [ J ]. Corrosion Science, 1968, 8 (8) : 603 -622.
  • 4Sanghoon Yoon, HyungJun Kim, Changhee Lee. Fabrica- tion of automotive heat exchanger using kinetic spraying process [ J ]. Surface and Coatings Technology, 2007, 201 (24) :9524-9532.
  • 5American Society for Testing and Materials. ASTM G85-02 Standard Practice for Modified Salt Spray (Fog) Testing [ S ]. Philadelphia,2002.
  • 6R J Moffat. Describing the uncertainties in experimental re- suits[ J]. Experimental Thermal and Fluid Science, 1988, 1(1) :3-7.
  • 7Dong-quan Deng, Lie Xu, Shi-qiong Xu. Experimental in- vestigation on the performance of air cooler under frosting conditions [ J]. Applied Thermal Engineering, 2003, 23 (7) : 905-912.
  • 8Yanping Xia, Anthony M Jacobi. Air-side data interpreta-tion and performance analysis for heat exchangers with sim- ultaneous heat and mass transfer: wet and frost surfaces [ J ]. International Journal of Heat and Mass Transfer, 2005, 48(25/26) : 5089-5102.

同被引文献10

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部