摘要
研究了一种多边带拍频产生多倍频、高功率毫米波的方法,并提出了相应的交错复用模块结构。该模块无需额外光滤波器件和复杂电路驱动,通过器件参数设置生成间隔可调的周期边带信号。理论分析表明,多个边带相互拍频并叠加最终形成毫米波信号,信号能量更为集中,且信号频率具有可调性。实验结果显示,多边带调制方法可实现12倍频、16倍频甚至18倍频毫米波信号,而且输出信号体现出明显高功率特性,相对典型双边带调制输出信号功率提高了20dB以上。根据系统仿真结果,多边带拍频光纤无线系统还具备较好的传输稳定性和抗色散能力,更适合长距离传输。
A method about multiple-sidebands beat is studied to produce a series of high-power millimeter-wave, and interleaver module is proposed. For the module without additional optical filter and complex circuit driver, periodical sideband signals generated by parameters setting are tunable. Theoretical analysis demonstrates that multiple- sidebands beat with each other, the millimeter wave signal is formed by superposition ultimately, the signal energy is more concentrated, and the frequency is tunable. Simulation results indicate that multiple-sidebands modulation method can generate 12-tupling, 16-tupling, even 18-tupling millimeter waves, and output signals reflect high power characteristics obviously. In comparison with typical bi-sideband modulation method, the power of millimeter wave signal is improved by more than 20 dB. According to the results of the system simulation, the proposed radio-over- fiber (RoF) system has better performance on transmission and anti-dispersion, and it is more suitable for long- distance transmission.
出处
《中国激光》
EI
CAS
CSCD
北大核心
2013年第8期120-125,共6页
Chinese Journal of Lasers
基金
国家自然科学基金(61202268)
广东省科技计划(2011B010200029
2011B090400344
2012B091100030)
关键词
光通信
交错复用
多边带
高功率
光生毫米波
optical communications
interleaver
multiple-sidebands
high power
optical millimeter-wave