摘要
为解决GDX6S包装机商标纸定位检测器不能检测出商标纸包裹错位烟包等问题,通过增加反射式光纤检测器对商标纸定位检测器进行了改进。固定于三号轮弧形板上的反射式光纤检测器,可以检测到错位外露的商标纸,从而对烟包商标纸包裹是否错位进行判断,并利用控制系统将商标纸包裹错位烟包在三号轮剔除口自动剔除。应用效果表明,改进后商标纸定位检测器稳定可靠,实现了商标纸包裹错位烟包的自动检测和剔除,商标纸错位烟包剔除率由改进前的27.9%提高至95.4%以上,错位故障处理时间由平均3 min/次减少到0.5 min/次,提高了卷烟包装品质和设备运行效率。
The label positioning detector in GDX6S packer was not able to identify a packet which was not squarely wrapped, therefore the detector was improved. A reflective optical fiber sensor was fixed on the arc plate of wheel No. 3, which could detect protrusive part of a label, and the packet wrapped in an obliquely folded label would be automatically rejected at the rejecting outlet of wheel No. 3 by a control system. The results of application showed that: the improved detector ran stably and reliably, it automatically detected and rejected the packet which was not squarely wrapped, the rejection rate increased from 27.9% to over 95.4%. It took 0.5 min for treating a fault on an average contrasting with 3 min before, the package quality and the efficiency of equipment were improved.
出处
《烟草科技》
EI
CAS
北大核心
2013年第8期27-28,36,共3页
Tobacco Science & Technology