期刊文献+

ABS乳液接枝聚合反应中影响接枝率的因素 被引量:3

Effect Factors of the Grafting Degree in ABS Emulsion Grafting Polymerization
下载PDF
导出
摘要 采用乳液聚合法合成ABS接枝聚合物,通过改变反应过程中聚丁二烯、引发剂和分子量调节剂的用量,改变反应温度及增量反应时间,考察ABS接枝聚合物接枝率的变化。结果表明:在实验范围内,接枝率随着聚丁二烯或分子量调节剂用量的增加迅速减小;随着引发剂用量的增加或增量反应时间的增长而增大;随着反应温度的升高而增大,但变化不大。 A series of ABS grafting polymer were synthesized by emulsion polymerization. The factors that affect the grafting degree of ABS grafting polymer include reaction temperature, incremental reaction time, the content of polybutadiene and initiator CHP and the chain transfer agent TDDM in emulsion polymerization were studied. The results show that grafting degree of ABS emulsion grafting polymer decreases with the increasing of the content of polybutadiene or chain mental reaction time is of reaction temperature transfer agent TDDM in emulsion polymerization. When the content of initiator CHP or incre- increased, the grafting degree is increased. The grafting degree increases with the increasing , but the influence is not obvious.
出处 《合成材料老化与应用》 2013年第4期6-9,共4页 Synthetic Materials Aging and Application
关键词 ABS 乳液聚合 接枝率 ABS, emulsion polymerization, grafting degree
  • 相关文献

参考文献4

  • 1Rink M, Ricco T, Lubert W, et al. Appl. Polym. Sci. [ J], 1975,22 : 429.
  • 2Aoki Y. Macromolecules[ J], 1987,20 : 2208.
  • 3Ricco T, Pavan A, Danusso F. Polymer [ J ], 1975, 16 : 685.
  • 4黄立本,张立基,赵旭涛.ABS树脂及其应用[M],2001:68.

同被引文献23

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部