摘要
BDS连斜测井仪原理上仪器的倾斜角和倾斜方位角就是井眼的倾斜角和倾斜方位角;当仪器出现故障或工作不正常时,检查测斜仪所输出的AX、AY、AZ、FX、FY、FZ、T七个模拟信号是否随仪器倾斜角度和自转的变化而相应的变化,当出现死值或卡值的现象时,可判断相应的表头损坏;当把各表头的值输入计算公式可计算出仪器的倾斜角和倾斜方位角。
In theory,the tilt Angle and azimuth Angle of the BDS oblique logging tool are the boreholes;When the instrument malfunctions,we can check the seven analog signal output by the instrument（AX,AY,AZ,FX,FY,FZ,T,following the change of the instrument＇s tilt Angle and autogiration）.If there is death value or card value,it means the corresponding part has been damaged.The instrument Angle and tilt Angle can be calculated by the value of the tools in calculation formula.
出处
《内蒙古石油化工》
CAS
2013年第6期77-78,共2页
Inner Mongolia Petrochemical Industry
关键词
测斜仪
加速度计
磁力计
三轴校验台
Inclinometer
Accelerometer
Magnetometer flow meter
Triaxial test board
