期刊文献+

用于分度热电偶的Co—C高温共晶点的制作和复现性研究 被引量:1

Research on the Construction and Reproducibility of the Co-C HTFP for Thermocouple Calibration
下载PDF
导出
摘要 介绍了中国计量科学研究院研制的用于分度热电偶的Co—c高温共晶点,以及使用铂/钯热电偶对共晶点进行的复现测量的结果。实验数据表明,Co-c高温共晶点的熔点复现性已达到了0.03℃。Co—C高温共晶点坩埚在1300℃以上温度经历了累计时间500h、110多次的熔化和凝固实验后依然完好。 The method of construction of Co-C high temperature fixed point for thermometer calibration and the testing results of reproducibility with thermoeouple at National Institute of Metrology of China are introduced. The experimental data show that the reproducibility of melting point of Co-C cell is 0.03 ℃ using Pt/Pt thermocouple, and the cell is robust after 110 melting and freezing cycles with 500 h above 1300 ℃.
出处 《计量学报》 CSCD 北大核心 2013年第5期430-434,共5页 Acta Metrologica Sinica
关键词 计量学 Co—C共晶点 复珊陛 钯热电偶 Metrology Co-C eutectic point Reproducibility Pt/Pd thermocouple
  • 相关文献

参考文献10

  • 1Bloembergen P, Yamada Y, Yamamoto N, et al. Realizing the high-temperature part of a future ITS with the aid of eutectic metal-carbon fixed point [ C ]//AIP Conference Proceedings, Chicago, Illinois, USA ,2003.
  • 2Yamad Y, Sasajima N, Sakuma F, et al. Realizing fixed point the copper point up to 2 500 °C using metal-carbon eutectics [ J ]. AIST Bulletin of Metrology, 2002, 1 ( 3 ) : 533 - 540.
  • 3Yamada Y. Advances in high-temperature standards above 1 000 °C [ J ]. MAPAN-Journal of Metrology Society of India, 2005,20 (2) -183 - 191.
  • 4Burns G W, Ripple D C. Techniques for fabrication and annealing Pt/Pd thermocouples for accurate measurements in the Range 0 °C to 1 300 °C [ C ] // TEMPEMEKO' 96, Torino, 1996.
  • 5Renote E M, Balluello R L, Rusby F E. EUROMET Guidelines for the Construction and Use of Platinum Versus Palladium Thermocouples CCT99 -08 [ S].
  • 6Masahiko G. Stability testing of and a reference function for the Pt/Pd thermocouple [ C ] //TEMPMEKO ' 99 , Delft, The Netherlands , 1999.
  • 7Edler F. Precise temperature measurement above 1 000 °C using thermocouple [ J ]. Proc Estonian Acad Sci Eng, 2007,13(4) :310 -319.
  • 8Yamada Y, Sakuma F, Ono A. Thermocouple observation of melting and Freezing plateaus for metal- carbon eutectic between the copper and palladium points [J]. Metrologia, 2000,37(1) :71 -73.
  • 9Edler F, Zheng W. Investigation of differently designed Pd-C eutectic fixed-point cells for the calibration of thermocouples [ J ]. Metrologia, 2011, 48 ( 5 ) : 275 - 282.
  • 10Burns G W, Ripple D C, Battuello M. Platinum versus palladium thermocouple : an emf - temperature reference function for the Range 0 °C' to 1 500 °C [ J ]. Metrologia, 1998,35 (5) :761 - 780.

同被引文献7

  • 1王铁军,柏成玉,原遵东,董伟,王景辉,段宇宁.高温共晶固定点的建立与复现[J].计量学报,2007,28(z1):23-27. 被引量:5
  • 2Pearce J V,Montag V,Lowe D,et al.Melting Temperature of High-Temperature Fixed Points for Thermocouple Calibrations[J].International Journal of Thermophysics,2011,32(1):463-470.
  • 3Yamada Y,Sakuma F,Ono A.Thermocouple Observations of Melting and Freezing Plateaus for Metal-Carbon Eutectics between the Copper and Palladium Points[J].Metrologia,2000,37(1):71-73.
  • 4Bloembergen P,Yamada Y,Sasajima N,et al.The Effect of the Eutectic Structure and the Residual Effect of Impurities on the Uncertainty in the Eutectic Temperatures of Fe-C and Co-C[J].Metrologia,2007,44(5):279-293.
  • 5Pearce J V,Edler F,Elliott C J,et al.Investigation of Pd-C Cells to Improve Thermocouple Calibration[J].Metrologia,2011,48(5):375-381.
  • 6Ongrai O,Pearce J V,Machin G,et al.Miniature Co-C Eutectic Fixed-Point Cells for Self-Validating Thermocouples[J].Measurement Science and Technology,2011,22(1):015104.
  • 7Parga C J,Journeau C,Tokuhiro A.Development of Metal-Carbon Eutectic Cells for Application as High Temperature Reference Points in Nuclear Reactor Severe Accident Tests:Results on the Fe-C,Co-C,Ti-C and Ru-C Alloys' Melting/Freezing Transformation Temperature under Electromagnetic Induction Heating[J].High Temperatures-High Pressures,2012,41(6):423-448.

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部