期刊文献+

粉末冶金材料空穴和夹杂的疲劳蠕变损伤分析 被引量:4

Analysis on Fatigue and Creep Damage of Powder Metallurgy Material with Void and Inclusion
下载PDF
导出
摘要 基于Gurson塑性本构模型对含空穴和夹杂的镍基粉末冶金材料Fgh95进行了疲劳蠕变性能分析。采用K-R损伤模型对含空穴和夹杂的粉末冶金材料Fgh95进行了高温蠕变及疲劳-蠕变交互作用性能研究。结果表明:在疲劳载荷和高温蠕变载荷作用下,空穴比夹杂更易引起粉末冶金材料的损伤失效,相对高温蠕变载荷而言,疲劳-蠕变交互作用更易引起材料的破坏,且疲劳-蠕变交互作用对含夹杂材料的影响大于含空穴材料。 The fatigue behaviors of powder metallurgy materials Fgh95 with void and inclusion were analyzed by Gurson constitutive model. The creep and fatigue-creep interaction behaviors of powder metallurgy materials with void and inclusion were studied by K-R damage model. The research results show that the void has more strong influence than the inclusion on the material damage in the fatigue loading and creep loading at high temperature. The inclusion has more strong influence than t he void on the material damage in the fatigue-creep loading. The fatigue-creep interaction load can cause the damage of material more easily than creep load. The results show that the void and inclusion can cause the damage of material under different load.
出处 《热加工工艺》 CSCD 北大核心 2013年第16期61-63,66,共4页 Hot Working Technology
关键词 粉末冶金 疲劳 蠕变 Gurson塑性本构模型 K-R损伤模型 powder metallurgy fatigue-creep Gurson constitutive model K-R damage model
  • 相关文献

参考文献12

二级参考文献26

  • 1汪武祥 呼军 等.FGH95粉末高温合金论文集[M].北京:北京航空材料研究所,1990.16.
  • 2国为民 吴剑涛.-[J].金属学报,1999,35:355-355.
  • 3张丽娜 董建新.-[J].金属学报,1999,35:337-337.
  • 4[7]Ristinmaa M. Void growth in cyclic loaded porous solid[J]. Mechanics of Materials, 1997, 26(2): 227 -245.
  • 5[8]Shamble S E, Chang D R. Effect of inclusions on LCF life of HIP plus heat treatment metal Rene 95 [J]. Metal Trans B, 1985, 168(5): 775- 786.
  • 6[9]Yokomaku T. Effects of defects and microstructure on the elevated temperature fatigue properties of P/M superalloy Merl 76[J]. J Soc Mat Sci, 1990, 39(2): 188 -198.
  • 7[10]Bussac A D. Prediction of competition between sur face and internal fatigue initiation in PM alloys[J]. Fat Fract Engng Mater Struct, 1994, 17(9): 1319 - 1328.
  • 8[11]Bussac A D. A probabilistic model for prediction of LCF surface crack initiation in PM alloys[J]. Fat Fract Engng Struct, 1993, 16(6): 861 - 878.
  • 9[12]Grison J, Remy L. Fatigue failure probability in a powder metallurgy Ni-base superalloy[J]. Eng Fract Mech, 1997, 57(1): 41-67.
  • 10[13]Jablonski D A. The effect of ceramic inclusions on the low cycle fatigue life of low carbon astroly subjected to hot isostatic pressing[J]. Mat Sci Eng, 1981, 48(2): 189 - 213.

共引文献40

同被引文献31

  • 1范志超,蒋家羚,陈学东.16MnR钢疲劳循环与蠕变交互作用损伤力学模型[J].浙江大学学报(工学版),2006,40(2):317-321. 被引量:11
  • 2姚华堂,轩福贞,王正东,涂善东.基于连续损伤理论的多轴蠕变设计[J].中国机械工程,2007,18(12):1438-1443. 被引量:5
  • 3韦照川 李德明.嵌入式系统发展概述.科技信息,2010,.
  • 4中国国家标准化管理委员会.GB/T 15248-2008金属材料轴向等幅低循环疲劳试验方法[S].北京:中国标准出版社,2008.
  • 5Kamezis P A, Durrant G, Cantor B.Characterization of reinforcement distribu- tion in cast Al-alloy/SiCp composites[J]. Materials Characteriza- tion, 1998,40: 97-109.
  • 6Getachew D. Non-newtonian convection in a porous matrix: constitutive equations and an application[D]. Chicago ,Illinois: The University of Illinois, 1994.
  • 7Valiev R Z,Langdon T G. Principles of equal-channel angular pressing as a processing tool for grain refinement [J]. Progress in Materials Science,2006,51 (7) : 881-981.
  • 8Eslami P, Karimi Taheri A. An investigation on diffusion bond- ing of aluminum to copper using equal channel angular extru-sion process[J]. Materials Letters,2011,65 : 1862-1864.
  • 9Henry R C,Lewis C W,Collins J F. Vehicle-related hydrocar- bon source compositions from ambient data: the GRACE/SAFER method[J]. Eniron Sci Technol. 1994,28(5): 823-832.
  • 10Rogers A. Statistical analysis of partials dispersions:the quadrat method[M]. London :Pion, 1974:43-56.

引证文献4

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部