摘要
结合工厂生产实际,应用CU-10检测仪对细钼丝拉丝模主要孔型参数的变化情况进行跟踪检测,例如压缩角、定径区长度、椭圆度等,对比分析确定其最佳工作参数控制范围,以提高拉丝模使用质量和工作寿命。
The pass parameter changing of fine molybdenum wire are detected by CU - 10 Inspector in accordance with factory~ actual processing, such as compression angle, length of the sizing area, ovality, and etc. Then the best operat- ing scope of pass parameter is determined so that the drawing dies＇quality and operating life are improved.
出处
《中国钼业》
2013年第4期46-49,共4页
China Molybdenum Industry
关键词
钼丝
拉丝模
压缩角
定径区
椭圆度
molybdenum wire
drawing die
compression angle
sizing area
ovality
