摘要
研究了HAT6065型高气泡表面积通量氰化浸出搅拌槽的清水动力学性能,简要分析了4种充气器配置条件下,充气量、空气分散度、溶解氧量、空气保有量等参数之间的关系。结果表明,在4种充气器配置条件下,氰化浸出搅拌槽的空气分散度均较高,可以为确定工业应用条件提供依据。
The hydrodynamics of HAT6065 mechanical agitation leaching tank with high bubble surface area flux was studied. The relationships between gas flow rate, air dispersity, dissolved oxygen, air holdup and etc. were briefly analyzed with the configuration positions of four bubble generators. The results show that the air dispersity in mechanical agitation leaching tank maintains high with the configuration positions of four bubble generators. This result can serve as the basis for industrial application.
出处
《有色金属(冶炼部分)》
CAS
北大核心
2013年第8期39-41,共3页
Nonferrous Metals(Extractive Metallurgy)
基金
国家高技术研究发展计划(863计划)项目(2012AA061503)
关键词
高气泡表面积通量
溶解氧
氰化浸出槽
流体动力学
空气分散度
high bubble surface area flux
dissolved oxygen
cyaniding leaching tank
hydrodynamicsl air dispersity