期刊文献+

成孔剂对多孔陶瓷过滤膜支撑体性能的影响 被引量:2

Influence of Pore-forming Material on Proterties of Ceramic Filter Support
下载PDF
导出
摘要 分别研究了成孔剂炭黑和CMC对莫来石过滤膜管支撑体成型性能、气孔率以及强度的影响。结果表明:适宜添加量的炭黑和CMC,均可使支撑体较好成型;随成孔剂含量增加,支撑体气孔率呈先缓后快的增长趋势;以CMC为成孔剂时,支撑体强度先增后减,其中CMC含量为4%时,强度达到最大值21MPa;以炭黑为成孔剂时,支撑体强度整体呈下降趋势。 The influence of carbon black and CMC on properties of formability, porosity and strength of mullite filter support were studied. The results show that appropriate amount of carbon black and CMC can make the support well formed. Porosity of ceramic increases slowly and then fast,with the increase of the amount of pore-forming material. The bending strength of support increases and then decreases, with CMC used as pore-forming material, and the bending strength reaches the maximum 21MPa, with 4wt.% addition of CMC. The bendinq stren_(:lth keeps stable and then decreases when carbon black is used as pore-forming material.
出处 《中国陶瓷工业》 CAS 2013年第3期10-13,共4页 China Ceramic Industry
基金 国家"863"计划课题(编号:2013AA065102) 北京市自然科学基金项目(编号:13B20198) 北京市科技专项2012年度阶梯计划项目(编号:Z121103002812015)
关键词 成孔剂 多孔陶瓷 过滤膜 支撑体 pore-forming material porous ceramic filter membrane support
  • 相关文献

参考文献6

二级参考文献56

共引文献109

同被引文献30

引证文献2

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部