摘要
The study determined the productivity, fuel consumption and product quality obtained with a new tractor OWered drum chipper, designed to reduce the gap between industrial chippers and small-scale chippers. The machine as tested with poplar logs and beech slabs, considered as representative of the raw material commonly used for ergy wood production. After accounting for accessory work and delays, productivity of green chips ranged between and 6 tons per scheduled machine hour, which was very good for a tractor-powered unit. Specific fuel consumption f oven-dry chips varied between 2.5 and 3.0 L per ton, or 0.6 L per m_3. These figures compared favourably with those btained from previous studies of both smaller and bigger chippers. Chip quality was very good. Samples contained no versize particles, qualifying for use in small-scale plants. The average size of beech chips was significantly larger than r poplar chips, possibly due to the higher strength of beech wood.
The study determined the productivity, fuel consumption and product quality obtained with a new tractor OWered drum chipper, designed to reduce the gap between industrial chippers and small-scale chippers. The machine as tested with poplar logs and beech slabs, considered as representative of the raw material commonly used for ergy wood production. After accounting for accessory work and delays, productivity of green chips ranged between and 6 tons per scheduled machine hour, which was very good for a tractor-powered unit. Specific fuel consumption f oven-dry chips varied between 2.5 and 3.0 L per ton, or 0.6 L per m_3. These figures compared favourably with those btained from previous studies of both smaller and bigger chippers. Chip quality was very good. Samples contained no versize particles, qualifying for use in small-scale plants. The average size of beech chips was significantly larger than r poplar chips, possibly due to the higher strength of beech wood.
基金
funded in part by the Regione Piemonte, through the project DCU NET