期刊文献+

响应面分析法优化超声提取蓖麻碱工艺 被引量:5

Optimization of Ultrasonic-assisted Extraction of Ricinine Using Response Surface Methodology
下载PDF
导出
摘要 以蓖麻叶为原料,对蓖麻碱的超声提取工艺优化进行研究,在单因素试验的基础上,选择超声时间、超声功率、料液比为自变量,以蓖麻碱提取率为影响值,采用响应面试验设计方法,研究各自变量及其交互作用对蓖麻碱提取率的影响。利用Design Expert8软件得到回归方程得模型并进行响应面分析,确定超声提取蓖麻碱的最佳工艺条件为料水比为1∶25 g/mL,超声时间为103.03 min,超声功率为621.05 W,此条件下蓖麻碱的提取率为2.63‰。 Response surface methodology was used to optimize the ultrasonic-assisted extraction of ricinine. Three influ- encing factors including ultrasonic time, uhrasonic power and sample-to-solvent ratio were investigated. On the basis of single factor experiments,a polynomial regression model equation was fitted by the combined use of CCD experimental design and regression analysis. By analyzing the regression model using response surface analysis, the optimum extraction conditions for the extraction of ricinin were determined as follows : 1: 25 g/mL sample-to-solvent, 103.03 rain ultrasonic time and 621.05 W ultrasonic power, and the extraction egiciency of ricinine was up to 2.63q~ under the optimized con- ditious. The confirmatory experiments indicated the good prediction ability of the established model.
出处 《天然产物研究与开发》 CAS CSCD 北大核心 2013年第8期1124-1129,共6页 Natural Product Research and Development
基金 国家自然科学基金项目(31060194) 教育部新世纪优秀人才支持计划(NCET-08-0870)
关键词 蓖麻碱 响应面分析法 超声波法 提取工艺 rieinine response surface methodology ultrasonic-assisted method extraction technology
  • 相关文献

参考文献6

二级参考文献46

共引文献79

同被引文献60

引证文献5

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部