摘要
随着国家加大超/特高压输电线路的建设力度,对输电线路杆塔的绝缘性能要求也越来越高。结合绝缘杆塔的国内外研究应用现状,提出绝缘杆塔的结构型式;以绝缘横担杆塔为例,参考500 kV单回路酒杯型杆塔,计算了绝缘横担杆塔和普通铁塔的绝缘水平,并在此基础上分析了两者在电气性能上的差异;从减少绝缘子片数和缩短横担长度2个方面分析了其对绝缘杆塔电气性能的影响。研究结果表明:绝缘横担杆塔在工频电压、操作过电压以及雷电过电压下的绝缘裕度都要高于普通杆塔;要实现绝缘杆塔安全性和经济性的统一,可以在减少绝缘子片数的同时适当缩短绝缘横担长度。
The accelerated constructinn of UHV Iransmission lines by the state brings about, higher insulation performance requirements for the UHV transmission line towers. Based on an investigation of the research and application stalus of insulation towers, lhe paper proposcs the strut'lure pattern of insulation towers. By taking the insulated cross-arm tower as an exanlple and with a reference to the 500 kV singh, circuit cup-type tower, the insulation level of lhe insulated cross-ann towers and the ordinary lowers are calculaled and the difference of their electriual performances are compared. The impaets of two factors, including reducing tile number of insulators and shortening the length of insuhtted cross-arm. are analyzed on tile electric, performance of insulation towers. The resuhs show thai the towers with insulated cross-arms are superior over the common towers in terms of insulating margin under frequency vohage, switching overvoltage and lightning overwdlage. It can he concluded that number of insulators and the length of the insulated cross-arms nlay he reduced concurrently to achieve the unificalion of the safety and economy of insulation towers.
出处
《中国电力》
CSCD
北大核心
2013年第9期56-60,共5页
Electric Power
基金
国家重点基础研究发展计划资助项目(973项目)(2009CB724503)
关键词
绝缘杆塔
绝缘配置
绝缘子片数
绝缘横担
绝缘裕度
insulation lower: insulation configuration
the number of' insulators
insulated cross-arm: irlsulation margin