摘要
A numerical method is used to model a capsule migration in a microchannel with small Reynolds number Re = 0.01. The capsule is modeled as a liquid drop sur- rounded by a neo-Hookean elastic membrane. The numer- ical model combines immersed boundary with lattice Boltz- mann method （IB-LBM）. The LBM is used to simulate fixed Cartesian grid while the IBM is utilized to implement the fluid-structure interaction by a set of Lagrangian moving grids for the membrane. The effect of shear elasticity and bending stiffness are both considered. The results show the significance of elastic modulus and initial lateral position on deformation and morphological properties of a circular cap- sule. The wall effect becomes stronger as the capsule ini- tial position gets closer to the channel wall. As the elastic modulus of membrane increases, the capsule undergoes less pronounced deformation and velocity in direction x is de- creased, thus, the capsule motion is slower than the back- ground flow. The best agreement between the present model and experiments for migration velocity takes place for the capsule with normal to moderate membrane elastic modulus. The results are in good agreement with experiment study of Coupier et al. and previous numerical studies. Therefore, the IB-LBM can be employed to make prediction in vitro and in vivo studies of capsule deformation.
A numerical method is used to model a capsule migration in a microchannel with small Reynolds number Re = 0.01. The capsule is modeled as a liquid drop sur- rounded by a neo-Hookean elastic membrane. The numer- ical model combines immersed boundary with lattice Boltz- mann method （IB-LBM）. The LBM is used to simulate fixed Cartesian grid while the IBM is utilized to implement the fluid-structure interaction by a set of Lagrangian moving grids for the membrane. The effect of shear elasticity and bending stiffness are both considered. The results show the significance of elastic modulus and initial lateral position on deformation and morphological properties of a circular cap- sule. The wall effect becomes stronger as the capsule ini- tial position gets closer to the channel wall. As the elastic modulus of membrane increases, the capsule undergoes less pronounced deformation and velocity in direction x is de- creased, thus, the capsule motion is slower than the back- ground flow. The best agreement between the present model and experiments for migration velocity takes place for the capsule with normal to moderate membrane elastic modulus. The results are in good agreement with experiment study of Coupier et al. and previous numerical studies. Therefore, the IB-LBM can be employed to make prediction in vitro and in vivo studies of capsule deformation.
