带式输送机之平行轴输出驱动装置架的优化设计

The Optimization Design of Parallel Axis Output Driving Device of Belt Conveyor

带式输送机的驱动装置中驱动装置架的设计,对整个驱动装置的正常使用起着至关重要的作用。尤其是对于平行轴式的驱动装置架,由于电机、减速器的中心轴是垂直布置的,所以对于这种驱动装置架的设计存在一定的严密性,既要保证省料,又要保证强度。而我们经常使用的《DTI(IA)型带式输送机设计手册》中驱动装置架的设计存在一定的缺陷,驱动装置架分裂开的情况时有发生,为避免类似现象的发生,我们对其设计作了部分优化,以达到驱动装置架不再分裂开的目的,也为以后类似驱动装置架的设计提供了参考依据。

The driving devices of belt conveyor drive frame design, for the entire drive device plays an important role in normal use. Especially for parallel shaft drive frame, due to the center of the motor, speed reducer shaft is vertical layout, so the design of the driving gear rack is for some rigor, both to ensure the material, and to ensure the strength. And we often use the DTII （A） type belt conveyor design manual drive in rack design has certain defects, driving device of the split situation occurs frequently, to avoid the happening of the similar phenomenon, we do part optimization of its design, to achieve the purpose of driving gear rack no longer split open, also for the future desizn of similar drive frame provides a reference basis.