期刊文献+

Pollutant mixing and transport process via diverse transverse release positions in a multi-anabranch river with three braid bars 被引量:4

Pollutant mixing and transport process via diverse transverse release positions in a multi-anabranch river with three braid bars
下载PDF
导出
摘要 A multi-anabranch river with three braid bars is a typical river pattern in nature, but no studies have been conducted to describe mixing characteristics of pollutants in the river. In this study, a physical model of a typical multi-anabranch river with three braid bars was established to explore the pollutant mixing characteristics in different branches. The multi-anabranch reach was separated into seven branches, B1, B2, B3, B4, B5, B6, and BT, by three braid bars. Five tracer release positions located 2.9 m upstream from the inlet section of the multi-anabranch reach were adopted, and the distances from the five positions to the left bank of the upstream main channel were 1/6B, 1/3B, 1/2B, 2/3B, and 5/6B (B is the width of the upstream main channel), respectively. The longitudinal velocities and pollutant concentrations in the seven branches were measured. The planar flow field and mixing characteristics of pollutants from the bottom to the surface in the multi-anabranch river were obtained and analyzed. The results show that the pollutant release positions are the main influencing factors in the pollutant transport process, and the diversion points and pollutant release positions jointly influence the percentage ratios of the pollutant fluxes in branches B 1, B2, and B3 to the pollutant flux in the upstream main channel. A multi-anabranch river with three braid bars is a typical river pattern in nature, but no studies have been conducted to describe mixing characteristics of pollutants in the river. In this study, a physical model of a typical multi-anabranch river with three braid bars was established to explore the pollutant mixing characteristics in different branches. The multi-anabranch reach was separated into seven branches, B1, B2, B3, B4, B5, B6, and BT, by three braid bars. Five tracer release positions located 2.9 m upstream from the inlet section of the multi-anabranch reach were adopted, and the distances from the five positions to the left bank of the upstream main channel were 1/6B, 1/3B, 1/2B, 2/3B, and 5/6B (B is the width of the upstream main channel), respectively. The longitudinal velocities and pollutant concentrations in the seven branches were measured. The planar flow field and mixing characteristics of pollutants from the bottom to the surface in the multi-anabranch river were obtained and analyzed. The results show that the pollutant release positions are the main influencing factors in the pollutant transport process, and the diversion points and pollutant release positions jointly influence the percentage ratios of the pollutant fluxes in branches B 1, B2, and B3 to the pollutant flux in the upstream main channel.
出处 《Water Science and Engineering》 EI CAS CSCD 2013年第3期250-261,共12页 水科学与水工程(英文版)
基金 supported by the National Basic Research Program of China (973 Program, Grant No.2008CB418202) the National Natural Science Foundation of China (Grants No. 50979026 and 51179052) the National Key Technologies R&D Program of China (Grant No. 2012BAB03B04) the Special Fund for Public Welfare Industry of the Ministry of Water Resources of China (Grant No. 201001028) the "Six Talent Peak" Project of Jiangsu Province (Grant No. 08-C) the Fundamental Research Funds for the Central Universities (Grant No. 2010B15514)
关键词 multi-anabranch river braid bar pollutant mixing characteristic pollutanttransport process multi-anabranch river braid bar, pollutant mixing characteristic pollutanttransport process
  • 相关文献

参考文献1

二级参考文献1

共引文献8

同被引文献24

引证文献4

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部