摘要
In modern processing of conducting materials, such as steel,the time-varying electromagnetic field plays a key role in obtaining the desired microstructure or eliminating solidification defects such as porosity and segregation in cast billets. Up to now,few studies on the induced electromagnetic force （also called the Lorentz force） field in liquid metal have been reported. Compared with the magnetic field, the induced force field is the real and only direct cause for flow control. The electromagnetic force is comprised of two components. One is time-independent and the other is time- dependent. The time-dependent component varies with time in both amplitude and direction. When it reaches the extreme value,it can be one dozen times larger than the time-independent component. In this paper, a new method to quantitatively describe the induced electromagnetic force in liquid metal under a harmonic electromagnetic field,including both its time- independent and dependent components, was proposed based on the formula derivation from the data of amplitude and phase angle. Through this method ,the features of the time-dependent component were discussed, including the directions of rotation and the long axis. As a result, the force pattern was described. With two example calculations, the method was explained in detail. The results of both examples show that the force field in liquid metal can be divided into several regions with different force features. Example 1 shows the effect of coil position on the evolution of the force field pattern in liquid metal. Example 2 is a kind of stirring by the travelling magnetic field ,whose results present the sub-structures in metal and show that most of them have almost the same rotating direction.
In modern processing of conducting materials, such as steel,the time-varying electromagnetic field plays a key role in obtaining the desired microstructure or eliminating solidification defects such as porosity and segregation in cast billets. Up to now,few studies on the induced electromagnetic force （also called the Lorentz force） field in liquid metal have been reported. Compared with the magnetic field, the induced force field is the real and only direct cause for flow control. The electromagnetic force is comprised of two components. One is time-independent and the other is time- dependent. The time-dependent component varies with time in both amplitude and direction. When it reaches the extreme value,it can be one dozen times larger than the time-independent component. In this paper, a new method to quantitatively describe the induced electromagnetic force in liquid metal under a harmonic electromagnetic field,including both its time- independent and dependent components, was proposed based on the formula derivation from the data of amplitude and phase angle. Through this method ,the features of the time-dependent component were discussed, including the directions of rotation and the long axis. As a result, the force pattern was described. With two example calculations, the method was explained in detail. The results of both examples show that the force field in liquid metal can be divided into several regions with different force features. Example 1 shows the effect of coil position on the evolution of the force field pattern in liquid metal. Example 2 is a kind of stirring by the travelling magnetic field ,whose results present the sub-structures in metal and show that most of them have almost the same rotating direction.
