摘要
某铜矿胶状黄铁矿含量较高,属难选矿石。针对其现场铜选别指标低的问题,进行高效铜捕收剂浮选试验研究。试验采用铜优先浮选工艺,高效捕收剂Y10作捕收剂、石灰法抑硫浮铜,获得了铜精矿铜品位为22.90%、回收率为86.83%的良好试验指标。
A copper ore has a high content of colloid pyrite which belongs to refractory ore. According to the problem of bad separation indexes in the operating plant, flotation tests were conducted on a high- efficiency collector of copper. Through adopting copper preferential flotation, using a new type high-efficiency collector Y10 as copper collector, lime as depressant, the copper concentrate grading 22.90% Cu was obtained, at recovery of 86.83% Cu, and good experimental results were achieved.
出处
《有色金属（选矿部分）》
CAS
北大核心
2013年第5期78-81,共4页
Nonferrous Metals（Mineral Processing Section）
关键词
捕收剂
浮选
胶状黄铁矿
黄铜矿
collector
flotation
colloid-type pyrite
chalcopyrite
