PROTOS MAX70接装机烟支输出装置的改进

The improvement of cigarette output system in PROTOS MAX70

为解决PROTOS MAX70接装机的夹带烟支输出装置在生产过程中易造成烟支挤压变形等质量问题,依据德国HAUNI公司PROTOS 2—2超高速卷接机组的烟支堆码技术,对MAX70接装机烟支输出装置进行了改进,取消了装置中的烟支输出皮带,在输出鼓轮后设计了柔性堆栈鼓轮,使烟支堆码分组输出.应用结果表明,改进后烟支输出装置故障维修次数占接装机总维修次数的比例由80.90%降低至10.00%,质量缺陷率由0.27%下降到0.11%.

In order to solve the quality problems such as distortion ot the cigarettes, wmcn was Drougllt by the output device of cigarettes in PROTOS MAX70 in the process of production, according to the advanced technology of cigarette stacker applied in PROTOS 2 - 2 super high-speed cigarette maker produced by German Company HAUNI,the cigarettes output system of MAX70 was improved by canceling the cigarettes output belts of MAX70 and designing a flexible stack drum behind the output drum and grouping output of cigarette stacker. And the results showed that after the system had been improved, the total percentage of the troubles of cigarette output device and quality defects of cigarettes was lowered from 80.9% to 10% and 0.27 % to 0.11% respectively.