摘要
介绍目前废旧塑料回收再利用技术的主要方法和不足之处,提出基于机械物理法的热固性塑料回收再利用方法,确定热固性塑料回收再利用的工艺流程。通过对热固性酚醛塑料回收再生试验,验证了机械物理法回收再生的可行性,最后对再生试样进行力学性能测试。结果表明,回收再生酚醛/聚丙烯共混料的拉伸强度与弯曲强度分别达到6 MPa和13 MPa以上,能满足回收再利用的要求。
Main methods and shortcomings about recycling technology of waste plastics were introduced, and the recycling mechanism of the waste thermosetting plastics based on mechanical and physical method was presented. Accordingly, the recycling process of waste thermosetting plastics was determined. By means of recycling and regeneration experiment on thermosetting phenolic plastics, the feasibility of recycling and regeneration based on mechanical and physical method was verified.At last, the mechanical properties of regeneration specimens were tested. The results show that tensile strength and bending strength of recycling phenolic/polypropylene plastics can reach 6 MPa and 13 MPa respectively, and it meets the recycling requirements.
出处
《工程塑料应用》
CAS
CSCD
北大核心
2013年第10期42-45,共4页
Engineering Plastics Application
基金
国家自然科学基金资助项目(50975074)
合肥工业大学青年教师科研基金(2012HGXJ0672)
关键词
热固性塑料
机械物理法
回收再利用
再生
thermosetting plastics
mechanical and physical method
recycling
regeneration
