期刊文献+

基于结构松弛理论的非球面透镜退火模拟 被引量:4

Annealing simulation of aspherical glass lenses based on structure relaxation theory
下载PDF
导出
摘要 针对透镜退火过程中玻璃具有的结构松弛现象,对玻璃退火结构松弛理论进行详细介绍。采用高级非线性有限元程序MSC.MARC,基于Narayanaswamy结构松弛模型对非球面透镜的退火过程进行数值仿真,获得了非球面透镜退火过程中体积变化及应力分布情况。最后对退火过程中退火速度的影响进行分析。结果表明,退火速度对透镜体积的影响不大,随着退火速度增加,退火应力不断增加。 According to the characteristic structural relaxation phenomenon of glass during the annealing stage, the structural relaxation theory explained by Narayanaswamy model was provided . The commercial finite element method (FEM) program MSC MARC was utilized for the analysis of the annealing process of aspheric lenses, and the volume and stress distribution of lenses were obtained. Influence of cooling rate of annealing was analysed. The results show that the cooling rate of annealing has little effect on the lenses volume, but the annealing stress increases continuously with the cooling rate increasing.
出处 《兵器材料科学与工程》 CAS CSCD 北大核心 2013年第5期1-5,共5页 Ordnance Material Science and Engineering
基金 国家科技重大专项(2010ZX04001-151) 国家自然科学基金(50975804) 江苏省科技计划(BE2011053)资助项目
关键词 结构松弛理论 退火过程 Narayanaswamy结构松弛模型 数值模拟 structure relaxation theory annealing stage Narayanaswamy structure relaxation model numerical simulation
  • 相关文献

参考文献11

  • 1勾志勇,王江,王楚,王磊,吴志海,伍丽莎,王秀芳.非球面光学设计技术综述[J].激光杂志,2006,27(3):1-2. 被引量:39
  • 2尹韶辉,朱科军,余剑武,朱勇建,陈逢军.小口径非球面玻璃透镜模压成形[J].机械工程学报,2012,48(15):182-192. 被引量:26
  • 3尹韶辉,大森整,林伟民,上原嘉宏,陈逢军,朱科军.一种光学材料高效超精密加工方法[J].中国机械工程,2008,19(21):2540-2544. 被引量:16
  • 4Gardon R, Narayanaswamy 0 S. Calculation of residual stress- es in glass [ J ]. Journal of the American Ceramic Society, 1970, 53 : 380-385.
  • 5de Bast J, Gilard P. Variation of the viscosity of glass and the relaxation of stresses during stabilization [J]. Journal of Phys- ics and Chemistry of Glasses, 1963,4: 117-128.
  • 6Narayanaswamy 0 S. A model of structural relaxation in glass [J]. Journal of the American Ceramic Society, 1971,54 : 491- 498.
  • 7Markovsky A, Soules T F, Chen V, et al. Mathematical and computational aspects of a general viscoelastic theory [J]. Journal of rheolo, 1987,33 : 785-813.
  • 8Kobayashi H, Takahashi H, Hiki Y. Temperature dependence of the viscosity through the glass transition in metaphosphate glasses and polystyrene [J]. Materials Science and Engineer- ing, 2006,442: 263-267.
  • 9Balajee Ananthasayanam. Computational modeling of preci- sion molding of aspheric glass optics [D]. South Carolina : Clemson University. 2008.
  • 10Jain A. Experimental study compression molding process aspherical gIass University, 2006. lenses [ D ] and numericaI analysis of for manufacturing precision Columbus: the Ohio State.

二级参考文献67

  • 1张效栋,房丰洲,程颖,魏桂爽.复杂非球面镜高效超精密车削加工法(英文)[J].纳米技术与精密工程,2010,8(4):346-351. 被引量:7
  • 2陈璠,王伟.低熔点玻璃精密模压技术概况[J].市场周刊,2010,23(9):109-110. 被引量:5
  • 3王光伟.对于非球面度较大的非球面光学零件的加工方法[J].云光技术,2004,36(3):24-27. 被引量:1
  • 4GU0 Yinbiao  WEI Lizhen.SOFTWARE-CONTROLLED SYSTEM OF ULTRA-PRECISION MACHINING AXISYMMETRIC ASPHERIC MIRROR[J].Chinese Journal of Mechanical Engineering,2006,19(2):256-259. 被引量:4
  • 5Bifano T, Yi Y, Kabl W K. Fixed Abrasive Grinding of CVD SiC Mirrors[J]. Precision Engineering, 1994,16(2): 109-116.
  • 6Suzuki H, Hirano M, Abe M, et al. Ductile Grinding of Chemical Vapor Deposited Silicon Carbide for X-ray Mirrors[J]. Journal of the JSPE, 1995, 61 (4) : 571-575.
  • 7Zhang C, Kato T, Li W, et al. A Comparative Study: Surface Characteristics of CVD - SiC Ground with Cast Iron Bond Diamond Wheel[J].International Journal of Machine Tools & Manufacture, 2000, 40(4): 527-537.
  • 8Ohmori H, Nakagawa T. Mirror Surface Grinding of Silicon Wafer with Electrolytic Inprocess Dressing[J].Annals of the CIRP, 1990, 39(1):329 -332.
  • 9Itoh N, Ohmori H, Liu C,et al. Super Smooth Surface Finishing of X-ray Mirror Materials by ELID lap Grinding and Metal-resin Bonded[C]//Proceeding of International Workshop on Extreme Optics and Sensors. Tokyo: Universal Academy Press, Inc. , 2003: 83-89.
  • 10Ohmori H, Dai Y, Lin W. Force Characteristics and Deformation Behaviors of Sintered SiC during an ELID Grinding Process[J].Key Engineering Mate rials, 2003, 238(2):65-70.

共引文献70

同被引文献28

  • 1邬烈恭.光学玻璃加工破坏层研究及粗磨、精磨、抛光工序加工余量的合理匹配[J].光学技术,1996,22(2):30-35. 被引量:10
  • 2王慧军,张飞虎,赵航,栾殿荣,陈亚春.超声波磁流变复合抛光中几种工艺参数对材料去除率的影响[J].光学精密工程,2007,15(10):1583-1588. 被引量:17
  • 3Zhao Qingliang, Liang Yingchun, David Stephenson, el al. Surface and subsurface integrity in diamond grinding of optical galss on Tetraform' s [J]. International Journal of Machine Toes & Manufacture, 2007 ( 47 ) : 2091-2097.
  • 4Scherer G W, Rekhson S M. Viscoelastic elastic composites: II, general theory [J]. Journal of the American Ceramic Soci- ety, 19E2 (65) : 399-406.
  • 5Zhou Tianfeng. Research on high-precision glass molding press for optical elements IDa. Japan Sendai: Tohoku University, 2009.
  • 6Yan Jiwang, Zhou Tianfeng, Jun Masuda, et al. Modeling high- ernperature glass molding process by coupling heat transfer and viscous deformation analysis [J ]. Journal of Precision Engi- neering, 2009,33 : 150-159.
  • 7Sharp D E, Ginther L B. Effect of composition and tempera- ture on the specificheat of glass [J]. Journal of the American Ceramic Society, 1951,34 : 260-271.
  • 8蒋胜利.玻璃密度与澄清质量的关系[J].玻璃纤维,1984(05):19-21.
  • 9Gardon R,Narayanaswamy 0 stresses in glass[J]; Journal Society, 1970, 53:380-385.
  • 10S. Calculation of residual of the American Ceramic Narayanaswamy O S. A model of structural relaxation in glass[J]. Journal of the American Ceramic Society, 1971, 54 491-498.

引证文献4

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部