摘要
为满足自主式水下航行器(AUV)多学科设计优化对几何模型创建过程自动化的要求,研究了基于CAD技术的AUV几何模型的参数化建模方法。首先对AUV几何模型特征进行具体分析,建立了AUV参数化的几何模型;然后在此基础上,以UG NX7.0软件作为开发平台,结合VC++工程应用,采用内部开发模式,驱动UG/Open API库函数,创建了AUV几何模型参数化建模的应用程序,并最终通过具体实例验证了该方法的可行性。
To meet the requirements of founding geometric model automatically by Autonomous Underwater Vehicle （AUV） multi-disciplinary optimization design,research was done on the AUV parametric modeling method based on Computer Aided Design （CAD）.First of all,AUV geometric model features were specifically analyzed,and the parametric model of AUV was created.Then based on the development software platform UG NX7.0,VC ＋＋ was used to drive the modeling functions of UG/Open API,and the CAD parametric modeling program of AUV was founded with internal mode.Finally,the method＇s feasibility was tested by an engineer example.
出处
《机械设计》
CSCD
北大核心
2013年第9期58-62,共5页
Journal of Machine Design
基金
国家高技术研究发展计划(863计划)资助项目(2011AA09A104)
