期刊文献+

多孔混凝土的制备工艺研究 被引量:1

Preparation and forming processing research for porous concrete
下载PDF
导出
摘要 多孔混凝土通过材料研选、采用特殊工艺制备得到,必须满足一定的抗压强度并具有良好的孔隙率。试验分析了不同搅拌时间、不同水灰比条件下的水泥浆体流动度,研究了不同的浆集比对多孔混凝土的抗压强度和孔隙率的影响,通过对试验数据分析处理得到了多孔混凝土孔隙率和抗压强度拟合的线性关系,以期为多孔混凝土的工程应用提供支撑。 Porous concrete is made by method of materials selection and special process preparation, certain compressive strength and good porosity should be attained.Under different mixing time and water cement ratios, fluidity of cement paste was analysed, effects with different paste-aggregate ratios on compressive strength and porosity of porous concrete was discussed, by means of test data processing, the fitting linear relationship between porosity and compressive strength was obtained, in order to support engineering application of porous concrete.
机构地区 徐州工程学院
出处 《混凝土》 CAS CSCD 北大核心 2013年第9期137-139,143,共4页 Concrete
基金 住房和城乡建设部科学技术项目(2009-K3-3 2010-R1-8) 江苏省"青蓝工程"骨干教师
关键词 多孔混凝土 流动度 浆集比 抗压强度 孔隙率 porous concrete fluidity paste-aggregate ratio compressive strength porosity
  • 相关文献

参考文献14

二级参考文献43

共引文献164

同被引文献1

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部