期刊文献+

控制轧制对高碳钢珠光体相变温度的影响 被引量:2

Effect of Control-Rolling on Pearlite Transformation Temperature of High Carbon Steels
下载PDF
导出
摘要 采用压力-膨胀仪测定了高碳钢经控制轧制后,在连续冷却下珠光体的相变温度;并分析了不同控轧参数对珠光体相变温度影响的规律。实验结果表明:奥氏体形变使连续冷却下珠光体的相变温度提高。 Pearlite transformation temperature after control-rolling was measured by a pre-ssure-dilatometer for high-carbon steels under conditions of continuous cooling. The effects of control-rolling parameters on pearlite transformation temperature are discussed and a conclusion is drawn that the latter will raise during continuous cooling by virtue of control-rolling.
出处 《东北工学院学报》 CSCD 1991年第1期43-47,共5页
关键词 控制轧制 高碳钢 珠光体 austenite,control-rolling,high carbon steels,pearlite,phase transformation temperature.
  • 相关文献

同被引文献6

  • 1沈逢祥,郁珊华.钢中珠光体组织层片间距的测量[J].物理测试,1989(3):32-34. 被引量:6
  • 2刘永铨.钢的热处理[M].北京:冶金工业出版社,1987.24.
  • 3Kazeminezhad M,Taheri A K. The Effect of Controlled Cooling After Hot Rolling on the Mechanical Properties of a Commercial High Carbon Steel Wire Rod. Materials and Design ,2003,24 :,'15.
  • 4Ettore Anelli. Application of Mathematical Modeling to Hot Rolling and Controlled Cooling of Wire Rods and Bars. ISU International, 1992,32(3) :440.
  • 5李斌,硕士学位论文,1986年
  • 6李怀明,硕士学位论文,1984年

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部