期刊文献+

V型纵槽对水平螺旋管外冷凝传热的强化 被引量:1

Research on Enhanced Condensation outside the Horizontal Coil Tube with V Grooves
下载PDF
导出
摘要 用实验方法研究水平螺旋管管外有纵向 V型槽时凝结换热的强化问题。在相同真空度下 ,测试当 V型槽的角度或数目变化时管外凝结换热系数随冷却水流量变化的规律。实验结果表明 ,V型槽夹角为 6 0°,槽深为 1mm,槽数为 2 8时强化效果最佳。还在相同实验条件下 ,比较 V型槽水平螺旋管与矩形槽水平螺旋管及水平螺旋光管的传热效果 ,得到可用于工程实际的 An experimental investigation is made to study the enhanced condensation heat transfer of horizontal coil tube with longitudinal “V”type grooves.The vacuum is kept unchanged to exclude the influence of air to condensation.The heat transfer coefficients of coil tubes with V grooves of different tangle and number are obtained.Compared with bare coil tube,tube with V grooves has better heat transfer characteristics and the results show the best construction is grooves with depth h=1mm,number N =28 and tangle φ =60°.Criterion equation is also obtained to describe the condensation heat transfer outside coil tube with V grooves.
出处 《化学工程》 EI CAS CSCD 北大核心 2000年第5期18-20,共3页 Chemical Engineering(China)
关键词 水平螺旋管 冷凝传热 强化 V型纵槽 换热器 horizontal coil tube,condensation heat transfer,enhanced heat transfer
  • 相关文献

参考文献6

  • 1杨世铭.传热学[M].高等教育出版社,1988..
  • 2刘明灿.水平螺旋管外部膜大辩论凝结换热强化的实验研究[硕士学位论文].西安:西安交大能源与动力工程学院,1991..
  • 3王世平.锯齿形翅片管强化冷凝传热的实验研究及其准则方程.中国工程热物理学会第四届年会[M].-,1983..
  • 4刘明灿,硕士学位论文,1991年
  • 5杨世铭,传热学(第2版),1988年
  • 6王世平,中国工程热物理学会第四届年会,1983年

共引文献2

同被引文献2

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部