期刊文献+

基于Abaqus的复合材料板冲击特性分析 被引量:8

Analysis on impact characteristics of composite material plates based on Abaqus
下载PDF
导出
摘要 基于Hashin准则,用Abaqus建立玻璃纤维/环氧树脂复合材料板的冲击仿真计算模型,分析材料在不同冲击能量、冲击质量与冲击速度影响下的初始损伤和损伤演化特性.通过对比发现仿真计算结果与试验结果吻合较好,表明该仿真计算模型对此材料的冲击预测有效. Based on Hashin criterion, the impact simulation model of glass/epoxy composite material plates is built by Abaqus. Under the different impact energy, impactor mass and impact velocity, the effect on the initial damage and damage evolution characteristics of the material is studied. The analysis results are in good consistency with the experimental results, which indicates that the simulation model is effective in the prediction of the material impact.
出处 《计算机辅助工程》 2013年第A02期21-25,共5页 Computer Aided Engineering
关键词 复合材料 冲击 损伤 ABAQUS composite material impact damage Abaqus
  • 相关文献

参考文献11

  • 1CHOI H Y, WU H Y T, CHANG F K. A new approach toward understanding damage mechanisms and mechanics of laminated composites due tolow-velocity impact: Part II: analysis[ J]. J Composite Mat, 1991 , 25(8) : 1012-1038.
  • 2HOSSEINZADEH R,SHOKRIEH M M,LESSARD L. Damage behavior of fiber reinforced composite plates subjected to drop weight impacts [ J ] .Composites Sci & Technol, 2006, 66( 1) : 61-68.
  • 3de MOURA M , MARQUES A T. Prediction of low velocity impact damage in carbon : epoxy laminates [ J ]. Composites Part A: Appl Sci &Manufacturing, 2002 , 33 (3) : 361 -368.
  • 4BOSTAPH G M,ELBER W. A fracture mechanics analysis for delamination growth during impact on composite plates [ C ]//Proc SympComposites. Boston, 1983.
  • 5WU H Y T, SPRINGER G S. Impact induced stresses, strains, and delaminations in composite plates[ J]. J Composite Mat, 1988,22(6):533-560.
  • 6KARAKUZU R,ERBIL E, AKTAS M. Impact characterization of glass/epoxy composite plates : an experimental and numerical study [ J ].Composites Part B: Eng, 2010,41(5) : 388-395.
  • 7宁荣昌.复合材料冲击损伤问题的研究现状[J].玻璃钢/复合材料,1992(6):35-40. 被引量:12
  • 8张彦,朱平,来新民,梁新华.低速冲击作用下碳纤维复合材料铺层板的损伤分析[J].复合材料学报,2006,23(2):150-157. 被引量:48
  • 9张少实,庄茁.复合材料与黏弹性力学[M].北京:机械工业出版社,2005:79.
  • 10SUN C T, TAO J. Prediction of failure envelopes and stress/strain behaviour of composite laminates [ J ]. Composites Sci & Technol, 1998 ,58(7) : 1125-1136.

二级参考文献19

  • 1De Moura MFSF,Marques A T.Prediction of low velocity impact damage in carbon-epoxy laminates[J].Composites Part A:Applied Science and Manufacturing,2002,33(3):361-368.
  • 2Hashin Z.Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,1980,47(2):329-334.
  • 3Huang Chien Hua,Lee Ya Jung.Experiments and simulation of the static contact crush of composite laminated plates[J].Composite Structures,2003,61 (3):265-270.
  • 4Zheng S,Sun C T.A double-plate finite-element model for the impact-induced delamination problem[J].Composites Science and Technology,1995,53(1):111-118.
  • 5Borg R,Nilsson L,Simonsson K.Modeling of delamination using a discretized cohesive zone and damage formulation[J].Composites Science and Technology,2002,62(10-11):1299-1314.
  • 6Zou Z,Reid S R,Li S.A continuum damage model for delaminations in laminated composites[J].Journal of Mechanics and Physics of Solids,2003,51(2):333-356.
  • 7Borg Rikard,Nilsson Larsgunnar,Simonsson Kjell.Simulation of low-velocity impact on fiber laminates using a cohesive zone based delamination model[J].Composites Science and Technology,2004,64(2):279-288.
  • 8Choi H Y,Wu H Y,Chang F K.A new approach toward understanding damage mechanisms and mechanics of laminated composites due to low-velocity impact--Part Ⅱ:Analysis[J].Journal of Composite Materials,1991,25(8):1012-1038.
  • 9ABAQUS Analysis User's Manual[M].Version 6.4.2003.
  • 10Feraboli Paolo,Masini Attilio.Development of carbon/epoxy structural components for a high performance vehicle[J].Composites Part B:Engineering,2004,35(4):323-330.

共引文献66

同被引文献42

引证文献8

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部