期刊文献+

甘蔗整秆剥叶关键技术与剥叶机理研究 被引量:4

Study on Key Technology and Mechanism of whole Stalk Sugarcane Leaf-stripping
下载PDF
导出
摘要 甘蔗是我国主要的糖料作物,目前我国甘蔗机械化收获技术水平较低导致蔗糖生产成本较高;而剥叶关键技术研究是甘蔗机械化收获技术发展的关键环节之一。针对上述问题,分析了国内外关于甘蔗整秆剥叶关键技术与剥叶机理的研究现状,指出叶鞘剥离机理是甘蔗整秆剥叶关键技术研究的重点内容。同时,提出了3个拟解决的关键科学问题:①叶鞘的基本破坏强度和破坏形式以及叶鞘剥离机理;②剥叶元件对叶鞘的破坏作用机理及其运动状态方程与动力学模型;③基于叶鞘剥离机理理论的甘蔗整秆剥叶关键技术。 Sugarcane is the main sugar crop in China.At present,the sucrose cost in China is higher than that of world average.The main reason is that mechanization level for sugarcane harvesting is too low.Study on key technology of whole stalk sugarcane leaf-stripping is one of the key parts of the development of the sugarcane harvesting mechanical technology.For above problems,the research status on both domestic and overseas whole stalk sugarcane leaf-stripping was analyzed.Study on the leaf sheath-stripping mechanism is the main content of research on key technology of whole stalk sugarcane leaf-stripping.Three key issues are presented as followings:(1) the fundamental failure strength,fracture forms of leaf sheath and its mechanism;(2) the fracture mechanism of leaf sheath under the action of leaf-stripping elements and its motion state equation and the dynamic model and(3) key technology of whole stalk sugarcane leaf-stripping based on the theory of leaf sheath-stripping mechanism.
出处 《农机化研究》 北大核心 2013年第11期13-17,共5页 Journal of Agricultural Mechanization Research
基金 国家自然科学基金青年科学基金项目(51205071) 广西师范大学博士科研启动基金项目(2013-2014)
关键词 甘蔗 整秆 剥叶 关键技术 机理 sugarcane whole stalk leaf-stripping key technology mechanism
  • 相关文献

参考文献38

  • 1区颖刚,张亚莉,杨丹彤,余平祥,张增学,贾瑞昌.甘蔗生产机械化系统的试验和分析[J].农业工程学报,2000,16(5):74-77. 被引量:18
  • 2黄晖,李明,邓干然.我国甘蔗剥叶机械的发展现状与建议[J].中国热带农业,2008(6):32-34. 被引量:7
  • 3Cansee S. A study of sugarcane leaf-removal machinery dur- ing harvest [ J ]. American J. of Engineering and Applied Sciences, 2010, 3( 1 ):186-188.
  • 4杨尚平,杨晓玉,赵斌.中空轴爪式甘蔗剥叶机的研究开发[J].机电产品开发与创新,2007,20(3):66-67. 被引量:4
  • 5Shukla L N, Singh I, Sandhar N S. Design development and testing of sugarcane clearner [ J ]. AMA, 1991, 22 ( 3 ) : 55- 58.
  • 6Srivastava A C, Singh K. Development of a power-driven sugarcane detrasher [ J ]. AMA, 1990, 2 1 ( 2 ): 49- 52.
  • 7蒙艳玫,李尚平,刘正士,邓劲莲,麻芳兰,王勇.小型甘蔗剥叶机的设计方法研究与开发[J].机械设计,2003,20(8):22-24. 被引量:7
  • 8阿部正俊,小島新,宮部芳照.さとうきぴ脱葉機構の関委に関する研究[ J].鹿児島大皐農撃部事術報告,1979.29,217-224.
  • 9小島新,阿部正俊,宮部芳照,等.ロール型さとうきぴ脱葉機に関する基礎的研究: II.脱葉ロールの耐久性について[J].鹿児島大拳農撃部撃術報告, 1982,32: 195-203.
  • 10宮部芳照,阿部正俊,小島新,等.さとうきぴ脱葉機の脱葉ロールに関する研究[ J].鹿児島大挙農塁手部撃術報告,1989,39:243-249.

二级参考文献51

共引文献98

同被引文献40

  • 1解福祥,区颖刚,刘庆庭,邹小平,郑丁科,王春政.侧悬挂推倒式整秆甘蔗收获机设计与试验[J].农业机械学报,2011,42(S1):26-29. 被引量:5
  • 2梁兆新,钮公藩,黄景剑.甘蔗收获机械结构原理及应用浅析[J].广西蔗糖,2014(1):14-20. 被引量:2
  • 3李超.基于功率谱密度的疲劳寿命估算[J].机械设计与研究,2005,21(2):6-8. 被引量:62
  • 4王光炬,乔艳辉,吕勇.甘蔗剥叶机理研究[J].山东农业大学学报(自然科学版),2007,38(3):461-464. 被引量:6
  • 5ASTM E206 -72,疲劳试验及数据统计与分析之有关属于的标准定义[S].美国材料与试验协会,1972.
  • 6欧金萍,王光远.结构随机振动[M].北京:高等教育出版社’1998.
  • 7机械设计手册委员会.机械设计手册(单行本)疲劳强度设计[M].北京:机械工业出版社,2007.
  • 8(美)Yun-LiLee,Jwo Pan,R B Hathaway,et al.疲劳拭验测试分析理论与实践[M].张然治,译.北京:国防工业出版社,2011.
  • 9中国机械工程学会,中国机械设计大典编委会.中国机械设计大典(2) [M],.南昌:江西科学技术出版社,2002.
  • 10A Fatemi, L Vang. Cumulative fatigue damage and life predictiontheories a survey of the state of the art for homogeneous materials[J] . intemationai journal of fatigue, 1998,20( 1) :9 -34.

引证文献4

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部