期刊文献+

某低品位混合铜矿选矿试验研究 被引量:3

Study on the Beneficiation Tests of a Low Grade Mixed Copper Ore
下载PDF
导出
摘要 某低品位混合铜矿原矿含铜0.32%,其中氧化铜占50.73%,属品位低且氧化率较高的铜矿石。为了充分利用该部分铜矿资源,针对该混合铜矿矿石特点,采用优先浮选硫化铜再活化浮选氧化铜矿,分别通过一粗三精一扫流程工艺,进行了一系列条件试验,并根据条件试验所得的最佳工艺参数进行闭路试验,获得了铜精矿铜品位18.58%、回收率77.55%以及伴生金回收率70.67%的良好指标。该工艺流程和药剂制度简单合理,适用性强,易于实现工业化生产。 The rude ore of a low grade mixed copper ore is a low grade and high oxidation rate copper ore, which with a grade of 0.32% and an oxygenation efficiency of 50.73% .To take full advantage of the partial copper resources and against the characteristics of mixed copper ore,the article conducted the copper sulfide flotation firstly, and then conducted activation and copper oxide flotation by the process of one roughing, three refining and one scavenging.A series of condition tests have been conducted,and the closed-circuit tests which based on the optimal parameters of condition tests can obtain the copper concentrate with a grade of 18.58%,recovery rate of 77.55% and associated gold recoveries of 70.67%.The flotation indexes are satisfactory.The technological process and reagent system are simple, adaptable and easy to realize commercial production.
出处 《黄金科学技术》 CSCD 2013年第5期71-75,共5页 Gold Science and Technology
关键词 低品位 高氧化率 混合铜矿 浮选 low grade high oxidation rate mixed copper ore flotation
  • 相关文献

参考文献12

二级参考文献36

  • 1李艺,赖来仁,周卫宁,覃朝科,陈孟林,崔天顺.铜泡石的矿物学特征及其地质意义[J].矿物学报,2004,24(4):378-380. 被引量:2
  • 2邢喜峰,林海,高玉娟.云南某铜矿选矿工艺试验研究[J].有色金属(选矿部分),2007(1):27-29. 被引量:7
  • 3董树文.造山带构造岩浆演化与成矿作用[A].见:陈毓川.当代矿产勘查评价的理论与方法[C].北京:地震出版社,1999.83-89.
  • 4赵智全,高永勤.华铜矽卡岩型铜矿床成矿规律及其预测[R].瓦房店:华铜铜矿,1979:20-60.
  • 5叶国华.云南德钦羊拉难选铜矿浮选工艺研究[D].昆明:昆明理工大学,2007.
  • 6李文渊 杨合群 赵东宏等.北祁连发现塞浦路斯型铜矿床.矿床地质,2001,18(3).
  • 7张鹰,刘进云.辽宁省瓦房店市大张屯铜钼矿普查申请建议书[R].沈阳:辽宁省有色金属勘查总院,2001.
  • 8项连达,吴秉宗.辽宁复县华铜矿区地质勘探总结报告[R].大石桥:辽宁省冶金地质勘探公司102队,1980.
  • 9罗良烽,文书明,周兴龙,胡天喜,徐凤平.氧化铜选矿的研究现状及存在问题探讨[J].矿业快报,2007,23(8):26-28. 被引量:29
  • 10胡熙庚.浮选理论与实践[M].长沙:中南工业大学出版社,1991..

共引文献52

同被引文献40

引证文献3

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部