摘要
通过对比研究印刷品干式复合工艺中施胶量、烘道温度、压辊温度和贴合压力对覆膜印刷品质量的影响,结果表明,施胶量为12~14g/m2、烘道温度65~75℃、压辊温度90~100℃和贴合压力12~14Mpa时,覆膜印刷品综合性能最佳.
Glue consumption, baking channel temperature, press roll temperature and contact pressure on the paper-plastic laminating process of film covering printed matter were studied, the result showed that the composite printed matter had the optimum performance when the glue consumption was 12-14 g/m^2, baking channel temperature was 65-75℃, press roll temperature was 90-100℃ and contact pressure was 12-14 Mpa.
出处
《广东化工》
CAS
2013年第20期128-129,共2页
Guangdong Chemical Industry
基金
广东省产学研项目
粤财教[2012]393号:2012B091100068
关键词
纸浆
干式复合
覆膜胶粘剂
工艺
印刷品
paper-plastic
dry laminating
laminating adhesive: process
printed matter