摘要
Titanium silicalite-1(TS-1)films were synthesized on stainless steel plate,glass slide and monolith supports via an in-situ hydrothermal method.Characterization data showed that the formation of TS-1 films was easier on the porous flat support with rough surface such as monolith than on the smooth non-porous supports like glass slide and stainless steel plate.The film on the monolith had the highest uniformity and smallest size of crystals.The catalytic property of monolithsupported film was tested for epoxidation of allyl chloride(ACH)by H2O2in a fixed bed reactor.Under the condition of a methanol(solvent)/ACH(90% )/H2O2(30% )ratio of 12:1:1,a LHSV of 1.35 h-1and a temperature of 318 K,the conversion of allyl chloride and the selectivity to epichlorohydrin reached 79% and 51% ,respectively.
Titanium silicalite-1(TS-1)films were synthesized on stainless steel plate, glass slide and monolith supports via an in-situ hydrothermal method.Characterization data showed that the formation of TS-1 films was easier on the porous flat support with rough surface such as monolith than on the smooth non-porous supports like glass slide and stainless steel plate.The film on the monolith had the highest uniformity and smallest size of crystals.The catalytic property of monolithsupported film was tested for epoxidation of allyl chloride(ACH)by H2O2in a fixed bed reactor.Under the condition of a methanol(solvent)/ACH(90% )/H2O2(30% )ratio of 12:1:1, a LHSV of 1.35 h-1and a temperature of 318 K, the conversion of allyl chloride and the selectivity to epichlorohydrin reached 79 % and 51 % , respectively.
基金
the Natural Science Foundation of Shanxi Province,China(No.2011011023-2)for financial support