期刊文献+

Practical evaluation of the drag of a ship for design and optimization 被引量:4

Practical evaluation of the drag of a ship for design and optimization
原文传递
导出
摘要 We consider two major components of the drag of a ship, the "friction drag" and the "wave drag", that are related to viscous friction at the hull surface and wavemaking, and mostly depend on the Reynolds number and the Froude number, respectively. We also consider the influence of sinkage and trim, viscosity, and nonlinearities on the drag. The sum of the friction drag given by the classical ITTC friction formula and the wave drag predicted by the modification, called Neumann-Michell (NM) theory, of the classical Neumann-Kelvin theory of ship waves is found to be within about 10% of experimental drag measurements for four ship hulls for which theoretical predictions and experimental measurements are compared. The sum of the ITTC friction drag and the NM wave drag can then be expected to yield realistic practical estimates that can be useful for routine applications to design and hull- form optimization of a broad range of displacement ships. Furthermore, we note several simple extensions of this highly simplified approach that can be expected to significantly improve accuracy. We consider two major components of the drag of a ship, the "friction drag" and the "wave drag", that are related to viscous friction at the hull surface and wavemaking, and mostly depend on the Reynolds number and the Froude number, respectively. We also consider the influence of sinkage and trim, viscosity, and nonlinearities on the drag. The sum of the friction drag given by the classical ITTC friction formula and the wave drag predicted by the modification, called Neumann-Michell (NM) theory, of the classical Neumann-Kelvin theory of ship waves is found to be within about 10% of experimental drag measurements for four ship hulls for which theoretical predictions and experimental measurements are compared. The sum of the ITTC friction drag and the NM wave drag can then be expected to yield realistic practical estimates that can be useful for routine applications to design and hull- form optimization of a broad range of displacement ships. Furthermore, we note several simple extensions of this highly simplified approach that can be expected to significantly improve accuracy.
出处 《Journal of Hydrodynamics》 SCIE EI CSCD 2013年第5期645-654,共10页 水动力学研究与进展B辑(英文版)
基金 partly supported by the Office of Naval Research
关键词 friction drag wave drag Neumann-Michell (NM) theory sinkage and trim nonlinear effects friction drag, wave drag, Neumann-Michell (NM) theory, sinkage and trim, nonlinear effects
  • 相关文献

参考文献16

  • 1NOBLESSE F., HUANG F. and YANG C. The Neumann-Michell theory of ship waves[J]. Journal of Engineering Mathematics, 2013, 79(1): 51-71.
  • 2NOBLESSE F., DELHOMMEAU G. and HUANG F. et al. Practical mathematical representation of the flow due to a distribution of sources on a steadily-advancing ship hull[J]. Journal of Engineering Mathematics, 2011, 71(4): 367-392.
  • 3NOBLESSE F., HUANG F. and YANG C. Evaluation of ship waves at the free surface and removal of short waves[J]. European Journal of Mechanics-B/Fluids, 2013, 38: 22-37.
  • 4HUANG F., YANG C. and NOBLESSE F. Numerical implementation and validation of the Neumann-Michell theory of ship waves[J]. European Journal of Mecha- nics-B/Fluids, 2013, 42: 47-68.
  • 5MCCARTHY J. H. Collected experimental resistance and flow data for three surface ship model hulls[R]. David W Taylor Naval Ship Research and Development Center, 1985, Report DTNSRDC-85/011.
  • 6Experimental data for the Wigley hull are reported in cooperative experiments on the Wigley parabolic model in Japan[R]. Prepared for the 17th ITTC Resistance Committee. 2nd edition, 1983.
  • 7Experimental data for the Series 60 model are reported in cooperative experiments on the Series 60 (Cb = 0.6) model[R]. Prepared for the 18th ITTC Resistance Committee. 1986.
  • 8OLIVIERI A., PISTANI F. and AVANZ1NI A.et al. Towing tank experiments of resistance, sinkage and trim, boundary layer, wake, and free surface flow around a naval combatant 1NSEAN 2340 model[R]. Iowa City, USA: University of Iowa, 2001, No. IIHR- TR-421.
  • 9KIM D. H., KIM W. J. and VAN S. H. Experimental in- vestigation of local flow around KRISO 3600TEU con- tainer ship model in towing tank[J]. Journal of the Society of Naval Architects of Korea, 2000, 37: 1- 10(in Korean).
  • 10NEWMAN J. N. Marine hydrodynamics[M]. Cambi- rdge, Massachusetts, USA: MIT Press, 1977.

同被引文献66

  • 1PERCIVAL S., HENDRIX D. and NOBLESSE F. Hydro- dynamic optimization of ship hull forms[J]. Applied Ocean Research, 2001, 23(6): 337-355.
  • 2HINO T. Shape optimization of practical ship hull forms using navier-stokes analysis[C]. Proceedings of the 7th International Conference on Numerical Ship Hydrody- namics. Nantes, France, 1999.
  • 3PERI D., ROSSETTI M. and CAMPANA E. Design opti- mization of ship hulls via CFD techniques[J]. Journal of Ship Research, 2001, 45(2): 140-149.
  • 4YANG C., SOTO O. and LOHNER R. et al. Hydrodyna-mic optimization of a trimaran[J]. Ship Technology Re- search, 2002, 49(2): 70-92.
  • 5PERI D., CAMPANA E. Multidisciplinary design optimi- zation of a naval surface combatant[J]. Journal of Ship Research, 2003, 47(1): 1-12.
  • 6CHEN P., HUANG C. H. An inverse hull design problem in optimizing the desired wake of ship[J]. Journal of ship Research, 2002, 46(2): 138-147.
  • 7TAHARA Y., STERN F. and HIMENO Y. Computational fluid dynamics-Based optimization of a surface combata- nt[J]. Journal of ship Research, 2004, 48(4): 273-287.
  • 8SAHA G. K., SUZUKI K. and KAI H. Hydrodynamic optimization of ship hull forms in shallow water[J]. Jour- nal of Marine Science and Technolggy, 2004, 9(2): 51- 62.
  • 9HARRIES S., ABT C. and HOCHKIRCH K. Modeling meets simulation-process integration to improve design[C] Honorary Colloquium for Prof. Hagen, Prof. Schluter and Prof. Thiel. Duisburg, Germany: University of Duisburg-Essen, 2004.
  • 10TAHARA Y., TOHYAMA S. and KATSUI T. CFD based multi-objective optimization method for ship design[J]. International Journal for numerical methods in fluids, 2006, 52(5): 499-527.

引证文献4

二级引证文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部