摘要
试验研究了球刻痕法对高磁感取向硅钢的铁损、矫顽力、相对磁导率、巴克豪森噪声等磁学性能的影响.研究结果表明:经过球刻痕处理后,高磁感取向硅钢的铁损明显降低,矫顽力下降,8 mm球刻痕过后铁损值与矫顽力分别下降16.2%和14.7%,且铁损和矫顽力均随刻痕间距降低而减少.刻痕后的高磁感取向硅钢磁导率在高磁感应强度下明显上升,刻痕后巴克豪森噪声值明显降低,经过对比分析确定8 mm为球刻痕的最佳刻痕间距.从磁畴观察、细化磁畴的原理等方面解释了细化磁畴对高磁感取向硅钢性能的影响原因.
The effects of the ball scribing on magnetic properties of high permeability grainoriented silicon steels, including the iron loss, coercive force, relative permeability, and Barkhausen noise were investigated. The results showed that the iron loss and coercive force of the high permeability grain-oriented silicon steels apparently decreased 16.2% and 14.7% respectively after 8 mm ball scribing and they both decreased with the decrease of the scribing spacing at the same magnetic flux density. At high flux densities, the permeability of the high permeability grain-oriented steels apparently increased, and Barkhausen noise decreased after the ball scribing. After comparison and analysis 8 mm is settled as the optimum scribing spacing. The effects of the domain refinement on high permeability grain-oriented silicon steels were interpreted from the static domain observation and principles of domain refinement.
出处
《东北大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2013年第11期1571-1574,共4页
Journal of Northeastern University(Natural Science)
基金
国家自然科学基金资助项目(51174057
51274062)
国家高新技术研究发展计划项目(2012AA03A503)
关键词
球刻痕
高磁感取向硅钢
铁损
巴克豪森噪声
矫顽力
磁导率
ball scribing
high permeability grain-oriented silicon steel
iron loss
Barkhausennoise
coercive force
permeability
