期刊文献+

某不规则钢框架构设计与对比分析

Design and Comparative Analysis of an Irregular Steel Frame Structure
下载PDF
导出
摘要 本文就某工程不规则钢框架结构设计现状进行分析,并将其与相应规范进行对比,最后根据对比结果制定出合理的构造措施,为今后同类工程的设计提供一定的参考依据。 This article analyzes the design status of an irregular steel frame structure and compares it with the related regulations. Reasonable measures are worked out, providing reference for the design of similar projects.
作者 张立文
出处 《价值工程》 2013年第33期88-89,共2页 Value Engineering
关键词 钢框架构 设计与对比 不规则 steel frame structure design and comparison irregular
  • 相关文献

参考文献3

二级参考文献21

  • 1Nishino F,Ueda Y,Tall L.Experimental investigation of the buckling of plates with residual stresses test methods for compression members[C] ∥.Proceeding of the Philadelphia[s.1.] :PA Special Technical Publication,1967:12-30.
  • 2Rasmussen K J R,Hancock G J.Plate slenderness limits for high strength steel sections[J].Journal of Constructional Steel Research,1992,23(1):73-96.
  • 3Hermann S D.On the local stability interaction effect of high strength steel columns[C] ∥Steel members and structural systems.Eurosteel Coimbra:[s.n.] ,2002:353-360.
  • 4Tang LRB,Mahendran M.Behavior of high strength steel compression members[C] ∥Proceedings of 10th Nordic Steel Construction Conference.Copenhagen:Denmark,2004:53-64.
  • 5邓椿森 施刚 张勇 等.高强度钢材压弯构件循环荷载作用下受力性能的有限元分析.建筑结构学报,2010,(1):28-34.
  • 6中华人民共和国建设部.GB 50011-2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.
  • 7Rasmussen K J R,Hancock G J.Tests of high strength steel columns[J].Journal of Constructional Steel Research,1995,34(1):27-52.
  • 8IABSE.Use and application of high-performance steels for steel structures[M].Zurich:IABSE,2005.
  • 9Pocock G.High strength steel use in Australia,Japan and the US[J].The Structural Engineer,2006,84(21):27-30.
  • 10Usami T,Fukumoto Y.Welded box compression members[J].Journal of Structural Engineering,1983,110(10):2457-2469.

共引文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部