摘要
为了探索利用桉树纤维化单板制造重组木的可行性,首先将桉树木材旋切成4mm厚的单板,再通过纤维可控分离技术进行疏解,经浸胶干燥后,采用冷压热固化法制备重组木,探讨重组木密度对其耐水性能和力学性能的影响。结果表明:随着密度由0.85g/cm3增加至1.20g/cm3,桉树重组木的耐水性能和力学性能均得到改善,达到或超过桉树实木和桉树单板层积材的性能。
A novel scrimber was made of fibrosis veneer （Eucalyptus urophylla） with density from 0.85 g/cm3 to 1.20 g/cm3.The results showed that the density had a positive effect on water resistance and mechanical properties of the scrimber.The properties tested were superior to solid wood and laminated veneer lumber made of the same materials.
出处
《木材工业》
北大核心
2013年第6期5-8,共4页
China Wood Industry
基金
中央级公益性科研院所基本科研业务专项基金"无醛厚芯实木复合板材制造关键技术与应用"(CAFINT2012K02)
关键词
桉树
新型重组木
纤维化单板
密度
耐水性能
力学性能
Eucalyptus urophylla
novel scrimber
fibrosis of veneer
density
water resistance
mechanical properties
