摘要
以处于粘附状态下的压电粘弹性微梁为研究对象,通过引入参数剥离数表示其粘附特征,分析了压电电压、粘弹性参数和几何参数对处于粘附状态下压电粘弹性微梁剥离数的影响.结果表明,压电电压能有效提高微梁的剥离数,这给通过压电电压修复已处于粘附状态的压电微梁提供了理论依据和参考.同时,微梁的几何参数对微梁的剥离数也有着重要影响,这对微梁的设计造成了一定的限制.
Adhesion properties of piezoelectric viscoelastic microbeam were researched.A parameter named peel number was introduced to show the adhesion properties of the piezoelectric viscoelastic microbeam,the effects of piezoelectric voltage,viscoelastic parameters,and geometric parameters on peel number of the piezoelectric viscoelastic microbeam under adhesion were analyzed.The results show that,if piezoelectric voltage rises,the peel number will increase efficiently,which presents theoretical basis for repairing the adhering piezoelectric microbeam.The geometric parameters of the microbeam also show significant influence on the peel number,which will make a certain restriction on the design of MEMS and NEMS.
出处
《湖南大学学报(自然科学版)》
EI
CAS
CSCD
北大核心
2013年第11期58-63,共6页
Journal of Hunan University:Natural Sciences
基金
国家自然科学基金资助项目(11272270)
福建省自然科学基金资助项目(2011J01024)
关键词
压电粘弹性微梁
粘附
粘弹性
压电效应
几何参数
剥离系数
piezoelectric viscoelastic microbeam
adhesion
viscoelasticity
piezoelectric effect
geometric parameters
peel number