超音速火焰喷涂碳化钨涂层与电镀硬铬镀层的对比研究
被引量:8
摘要
超音速火焰喷涂技术制备碳化钨涂层,可得到显微硬度和中性盐雾耐腐蚀性优于硬铬镀层的防护层,其自身良好的韧性和与基体较高的结合强度,使其成为硬铬镀层理想的替代技术。
出处
《机械制造》
2013年第8期86-88,共3页
Machinery
参考文献4
-
1邓世均,程旭东.热喷涂材料技术手册[M].北京:机械工业出版社,1991.255-263.
-
2周克崧,邓春明,刘敏,宋进兵,邓畅光.300M钢基体上高速火焰喷涂WC-17Co和WC-10Co4Cr涂层的疲劳和抗盐雾腐蚀性能[J].稀有金属材料与工程,2009,38(4):671-676. 被引量:56
-
3王志平,董祖珏,霍树斌,李丽,王刚.超音速火焰喷涂涂层特性研究[J].机械工程学报,2001,37(11):96-98. 被引量:15
-
4邓春明,周克崧,刘敏,宋进兵.超音速火焰喷涂及封孔处理对低合金钢抗中性盐雾腐蚀性能的影响[J].材料保护,2006,39(10):33-35. 被引量:7
二级参考文献22
-
1邓春明,周克崧,刘敏,宋进兵,伍超群,况敏.近疲劳强度载荷下WC/Co涂层对300M钢疲劳性能的影响[J].机械工程材料,2006,30(9):44-47. 被引量:4
-
2邓春明,周克崧,刘敏,伍超群.Cr对超音速火焰喷涂WC-Co涂层抗中性盐雾腐蚀性能的影响[J].材料开发与应用,2007,22(3):33-36. 被引量:31
-
3Nascimento M P, Souzab R C, Pigatin W Let al. International Journal of Fatigue[J], 2001, 23(7): 607.
-
4Sartwell B D, Natishan P M, Singer I Let al. Proceedings of AESF Aerospace~Airline Plating & Metal Finishing Forum[C]. San Antonio: The American Electroplaters and Surface Finishers Society, 1998:341.
-
5Sartwell B D, Bretz P E. Advanced Materials Processes[J], 1999, 156(2): 25.
-
6Wasserman Ch, Boecking R, Gufstasson S. Proceedings of the International Thermal Spray Conference[C]. Ohio, Materials Park: ASM International, 2001:69.
-
7Yi Ming. Anti-Corrosion[J], 2003(9): 45.
-
8Eming U, Nestler M C, Tauchert Get al. Proceedings of UTSC'99[C]. Dusseldorf: German Welding Society, 1999:462.
-
9Qiao Yunfei. Mechanical and Tribological Properties of Thermally Sprayed WC-17Co Coatings[D]. New Jersey: Steven Institute of Technology, 2001.
-
10Padilla K, Valasquez A, Bcrrios A J A et al. Surface and Coating Technology[J], 2002, 150(2-3): 151.
共引文献73
-
1刘丰刚,张文军,刘奋成,黄春平,郑海忠.激光增材制造300M钢的组织及耐腐蚀性能[J].特种铸造及有色合金,2022,42(9):1071-1075. 被引量:1
-
2高俊国,张欢欢,张昂.航空领域热喷涂碳化钨涂层国内外标准对比分析[J].标准科学,2021(5):84-89. 被引量:3
-
3翟敏,安浩.超音速火焰喷涂与电镀铬的工艺研究[J].中国科技纵横,2018,0(2):81-81. 被引量:1
-
4章建华.通用航空飞行器起落架技术的发展趋势和关键技术[J].军民两用技术与产品,2018,0(24):42-42.
-
5马彬,张秋明,赵九蓬,李垚.1Cr12Ni3MoVN合金抗盐雾腐蚀性能研究[J].材料保护,2013,46(S2):64-66. 被引量:1
-
6郭国林,李亚江,段满意,王娟.C11300(T_3)基体亚音速火焰喷涂层特性的研究[J].焊接技术,2005,34(2):14-16.
-
7邓春明,刘敏,任建平,邓畅光.AZ31镁基高速火焰喷涂WC涂层的研究[J].轻金属,2008(2):48-52. 被引量:5
-
8唐春阳,陈荣发,沈兆侠,朱瑞,杨锋,苏发山.螺杆表面超音速喷涂WC-Co耐磨涂层的研究[J].扬州大学学报(自然科学版),2008,11(1):34-37. 被引量:1
-
9任建平,刘敏,邓春明,宋进兵.铝合金表面活性燃烧高速燃气喷涂WC涂层的耐中性盐雾腐蚀性能[J].机械工程材料,2009,33(3):39-42. 被引量:4
-
10周克崧,邓春明,刘敏.超音速火焰喷涂WC涂层替代电镀硬铬:疲劳和摩擦磨损性能[J].中国工程科学,2009,11(10):48-54. 被引量:25
同被引文献86
-
1查柏林,王汉功,苏勋家.超音速喷涂技术在再制造中的应用[J].中国表面工程,2006,19(z1):174-177. 被引量:8
-
2WANG Yu-yue LI Chang-jiu MA Jian YANG Guan-jun.Effect of flame conditions on abrasive wear performance of HVOF sprayed nanostructured WC-12Co coatings[J].中国有色金属学会会刊:英文版,2004,14(z1):72-76. 被引量:5
-
3谢兆钱,王海军,郭永明,刘晓亭,李绪强.超音速等离子喷涂超细WC-12Co涂层的性能[J].中国表面工程,2010,23(5):54-58. 被引量:12
-
4解明祥,张世宏,李明喜,完卫国,李国徽.超音速火焰喷涂Cr_3C_2-25NiCr涂层高温摩擦磨损性能[J].材料热处理学报,2012,33(S2):129-133. 被引量:7
-
5陈鹏,姚文林.铝基轴瓦材料的特性与应用[J].机械,2009,36(S1):121-122. 被引量:4
-
6关晓艳,王立平,张广安,蒲吉斌.磁控溅射沉积高承载、低摩擦MoS_2/Ti复合薄膜[J].摩擦学学报,2015,35(3):259-265. 被引量:16
-
7王会文,曾良宇.轴瓦三元合金电镀工艺及挂具的研究[J].内燃机配件,1993(1):1-7. 被引量:2
-
8卢耀辉,曾京,邬平波.铁路客车车体轻量化问题的研究[J].机械强度,2005,27(1):99-103. 被引量:22
-
9马素媛,陈瑞,贺笑春,李家宝,郝学卓.0Cr13Ni4Mo马氏体不锈钢表层的喷丸强化[J].金属学报,2005,41(1):28-32. 被引量:11
-
10王海军,蔡江,韩志海.超音速等离子与HVOF喷涂WC-Co涂层的冲蚀磨损性能研究[J].材料工程,2005,33(4):50-54. 被引量:31
引证文献8
-
1袁野.超音速火焰喷涂碳化钨涂层与电镀硬铬镀层的对比探究[J].冶金管理,2019(23):33-33. 被引量:5
-
2陈小明,周夏凉,吴燕明,王亚,毛鹏展,王莉容.高焓等离子喷涂WC-10Co4Cr涂层的耐磨性[J].中国表面工程,2015,28(6):88-95. 被引量:9
-
3吴烨卿,谢懿,高海生,祝生祥,文静波,曹均,洪松.内燃机轴瓦涂层的研究现状[J].机械制造,2020,58(8):1-5. 被引量:4
-
4李腾,武丽明,李春雷,梁勇.液压油缸活塞杆表面腐蚀分析[J].装备机械,2021(2):71-73. 被引量:2
-
5王新柱.柱塞式注水泵工作可靠性研究及应用[J].石化技术,2021,28(6):17-19. 被引量:2
-
6张凡凡,张利峰,李欧,王威,杨雕.身管内膛镀铬性能检测研究[J].装备环境工程,2022,19(7):18-25.
-
7金鹏,高杰,林子怡,杨清芸,刘培,姜凯,朱浩,苗健.超音速火焰喷涂制备铝基复合制动盘工艺及力学性能研究[J].现代制造工程,2023(7):112-116.
-
8唐斌,孙霄,杜强,朱杰.超音速火焰喷涂WC-17Co合金涂层修复飞机燃油接受探管导轨磨损部位[J].机械工程材料,2019,43(4):44-47. 被引量:2
二级引证文献24
-
1周志强,徐健,蒋永兵,王开,郝娇山,段大军.Stellite12和Stellite20涂层的耐磨性和耐腐蚀性能对比研究[J].热喷涂技术,2021,13(3):65-71. 被引量:1
-
2刘顾,汪刘应,葛超群,蔡叶平.CNTs含量对微弧等离子喷涂CNTs/AT40涂层力学性能的影响[J].中国表面工程,2016,29(5):95-101.
-
3刘自敬,曾威,杨焜.超音速等离子喷涂NiCoCrAlYTa-10% Al2O3涂层性能的研究[J].材料研究与应用,2017,11(1):23-29. 被引量:7
-
4袁蓓,袁晓静,查柏林,陈小虎,禹志航,李站良.等离子喷涂沉积WC-10Co4Cr涂层的脱碳机制与腐蚀摩擦学特性[J].热加工工艺,2017,46(14):159-163.
-
5方勇,刘伟,陈小明.高焓等离子喷涂Al2O3-40%TiO2复合陶瓷涂层的制备与性能表征[J].中国科技成果,2017,0(23):35-38.
-
6孙丽丽,王尊策,王勇.AC-HVAF热喷涂非晶和金属陶瓷涂层在压裂液中的冲蚀行为[J].中国表面工程,2018,31(1):131-139. 被引量:3
-
7袁晓静,查柏林,陈小虎,禹志航,王新军,阳能军,姚春江.等离子喷涂WC-10Co-4Cr涂层的组织演变与抗腐蚀磨损性能[J].稀有金属材料与工程,2019,48(2):473-481. 被引量:4
-
8曾威,杨焜,陈龙飞.GH3536高温合金表面等离子喷涂镍铝钨涂层的微观结构与性能[J].电镀与涂饰,2018,37(24):1123-1127. 被引量:1
-
9孟超,张润.影响轴瓦三元(Pb-Sn-Cu)镀层质量的因素及分析[J].山西化工,2021,41(2):111-113.
-
10金慧玲,丁兰花,陈继红.石墨烯加入量对光伏板表面喷涂PU/Cu涂层结构和光泽度的影响[J].材料保护,2021,54(8):71-74.
-
1郑毅,郑卫刚.一种电镀硬铬镀层的替代技术——超音速火焰喷涂碳化钨涂层[J].金属材料与冶金工程,2013,41(3):36-38. 被引量:8
-
2陈登民,于铁柱,刘芳,姚冬旭.浅谈27SiMn调质材质对硬铬镀层的影响[J].液压气动与密封,2013,33(11):67-68.
-
3DEBORAHC.BOLLES,朱有利.HVOF热喷涂可以替代硬铬镀层[J].表面工程,1996(2):43-45. 被引量:3
-
4张琦,关山,胡如南.热处理温度对硬铬镀层性能的影响[J].北京航空航天大学学报,2002,28(4):399-401. 被引量:6
-
5Bisse.,H,门益成.激光及其替代技术[J].光电子技术与信息,1990(2):26-29.
-
6胶接及非金属材料的焊接[J].机械制造文摘(焊接分册),1996,0(6):17-17.
-
7何玉均,黄政.连杆销螺栓电镀硬铬故障的分析和排除[J].涂装与电镀,2009(3):41-41.
-
8薛武智.采用树脂金刚石砂轮磨削气缸体硬铬镀层[J].组合机床与自动化加工技术,2007(12):89-90. 被引量:1
-
9钟如涛,龚涛,陈浮.激光拼焊汽车板的发展趋势[J].武汉工程职业技术学院学报,2013,25(2):25-28. 被引量:3
-
10殷傲宇,邓畅光,张吉阜,肖来荣,戴红亮.超音速火焰喷涂WC-10Co4Cr涂层对30CrMnSiA钢防护性能的影响[J].热喷涂技术,2011,3(3):60-64. 被引量:6